{"title":"Switch Eurorack Modules","description":"","products":[{"product_id":"alm-busy-circuits-boss-bow-two","title":"ALM Busy Circuits Boss Bow Two","description":"\u003cp\u003e‘Boss Bow Two’ is an 8 way bidirectional voltage controlled switch with 3 different control modes: address, strobe, and step. Each control mode uniquely routes signals from an input ‘I\/O’ to an output ‘I\/O’.\u003cspan class=\"Apple-converted-space\"\u003e \u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003eAddress mode allows for instant routing manually via the offset or external control voltage, step mode sequentially advances I\/O following signal at the clock input and the strobe mode combines the two, holding the addressed position until the next clock pulse.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe reset input allows for master on off switching in address and strobe modes and traditional sequencer style ‘reset’ in step mode. The control input features both an attenuverter and offset to precisely select which of the 8 I\/O’s are available to be ‘switched’ in address and strobe modes and sets the direction of travel in step mode.\u003c\/p\u003e\n\u003cp\u003eAs it is bidirectional, audio or CV can be routed from 1 of up to 8 inputs to a single output or a single input to 1 of up to 8 outputs. The unique features and flexibility of the ‘BB2’ allow for a wide range of potential patches to be created.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth:  8HP \u003c\/li\u003e\n\u003cli\u003eDepth: 38mm\u003c\/li\u003e\n\u003cli\u003ePower: 40mA @ +12V  \/ 10mA @ -12V \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALM Busy Circuits","offers":[{"title":"Default Title","offer_id":31964712534110,"sku":"12534110","price":289.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/ALMBusyCircuitsBossBowTwoMultipeFilterModule.jpg?v=1591814801"},{"product_id":"wmd-sl3kt","title":"WMD SL3KT","description":"\u003cp\u003eSL3KT (pronounced \"Select\")  is a simple three-channel switch module for Eurorack Modular Synthesizers.  \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThree independent, two-way switches allow for users two select between different sources or destinations of both CV and Audio Signals. Useful for many tasks in a Eurorack system such as sequence selecting, CV selecting, boolean logic operations, group switching, group routing, gating, waveform mixing, and so much more!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 4HP\u003c\/li\u003e\n\u003cli\u003eDepth: 30mm\u003c\/li\u003e\n\u003cli\u003ePower: 10mA @ +12V \/ 10mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WMD","offers":[{"title":"Default Title","offer_id":31991508795486,"sku":"08795486","price":237.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/WMDSL3KTTripleBi-DirectionalSwitch.jpg?v=1592366010"},{"product_id":"shakmat-modular-tessitura-tailor","title":"Shakmat Modular Tessitura Tailor","description":"\u003cp\u003e\u003cspan\u003eThe Tessitura Tailor adds or substracts a precise voltage (from -2 to +2 volts) to the signal received at the CV input. This signal is transposed by octaves, depending on the rotary switch’s position. As the CV input is normalised to 0 volt, the module works without any input as an octave switch.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 10HP\u003c\/li\u003e\n\u003cli\u003eDepth: 25mm\u003c\/li\u003e\n\u003cli\u003ePower: 1mA @ +12V \/ 1mA @ -12V \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Shakmat","offers":[{"title":"Default Title","offer_id":32010690756702,"sku":"90756702","price":115.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/ShakmatModularTessituraTailorCVTransposer.jpg?v=1592787400"},{"product_id":"2hp-3-1","title":"2hp 3:1 - Black","description":"\u003cp\u003e3:1 is a voltage controlled gate switch. It allows the user to send one of three input signals to a single output.\u003c\/p\u003e\n\u003cp\u003eControl over the active input allows the user to craft unique rhythmic events from existing gates and clocks within a patch. The module can also function as a gate summer allowing for the creation of polyrhythms from multiple inputs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 2HP \u003c\/li\u003e\n\u003cli\u003eDepth: 47mm\u003c\/li\u003e\n\u003cli\u003ePower: 32mA @ +12V  \/ 3mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"2hp","offers":[{"title":"Default Title","offer_id":32064353566814,"sku":"53566814","price":114.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/877.909.0303Home3-1VoltageControlledSwitch_Black_2hp3-1VoltageControlledSwitch_Black.jpg?v=1594512365"},{"product_id":"doepfer-a-182-1-switched-multiples","title":"Doepfer A-182-1 Switched Multiples","description":"\u003cp\u003e\u003cspan size=\"2\" face=\"Arial\" style=\"font-family: Arial; font-size: small;\" data-mce-style=\"font-family: Arial; font-size: small;\"\u003eModule A-182-1 is a simple passive multi-connector similar to the multiples modules\u003cspan\u003e \u003c\/span\u003eA-180-1\/A-180-2. In contrast to modules A-180-1\/2 each socket is equipped with a 3-position switch that allows to connect the corresponding socket to the internal bus #1 (left position), bus #2 (right position) or to turn the socket off (center position).\u003c\/span\u003e\u003cspan size=\"2\" face=\"Arial\" style=\"font-family: Arial; font-size: small;\" data-mce-style=\"font-family: Arial; font-size: small;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" data-mce-style=\"font-family: Arial; font-size: small;\"\u003eExamples:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli data-mce-style=\"padding-left: 40px;\"\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" data-mce-style=\"font-family: Arial; font-size: small;\"\u003eall switches in left position or all switches in right position: 8-fold multiple\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-style=\"padding-left: 40px;\"\u003e\n\u003cspan style=\"font-family: Arial; font-size: small;\" data-mce-style=\"font-family: Arial; font-size: small;\"\u003e\u003c\/span\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" data-mce-style=\"font-family: Arial; font-size: small;\"\u003e four switches in left position and four switches in right position: two 4-fold multiple\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-style=\"padding-left: 40px;\"\u003eX switches in left position, Y switches in right position and Z switches in center position: two separate multiples with some sockets turned off\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 6HP\u003c\/li\u003e\n\u003cli\u003eDepth: 30mm\u003c\/li\u003e\n\u003cli\u003ePower: Passive\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":32144194502750,"sku":"94502750","price":125.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-182-1SwitchedMultiples.jpg?v=1598344863"},{"product_id":"instruo-tain","title":"Instruo Tain","description":"\u003cp class=\"p1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003eThe Instruō tàin is a two channel analogue bidirectional switch, similar to those found on classic semi-modular systems of the 1970s. With momentary and latching functionality, external control and a manual button per channel, tàin can seamlessly switch between control voltage contours, trigger\/gate patterns as well as audio signals all the way into audio rate.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eWidth: 4HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eDepth: 27mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: 400;\"\u003ePower: 10\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003emA @ +12V \/ 5\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003emA @ -12V\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Instruo","offers":[{"title":"Default Title","offer_id":32184038555742,"sku":"38555742","price":244.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/instruotainswitchutilitymodule.jpg?v=1600653945"},{"product_id":"klavis-mixwitch","title":"Klavis Mixwitch","description":"\u003cdiv class=\"uk-margin uk-dropcap\"\u003e\n\u003cp\u003eFocused versatility seems an oxymoron when describing the features that led us to design the Mixwitch.\u003c\/p\u003e\n\u003cp\u003eWith only a pinch of mixing, inverting and controlled switching, we brew up a plethora of combinations and uses.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is voltage processing magic!\u003c\/p\u003e\n\u003cp\u003eThe Mixwitch design comes from a frustration with attenuvertors (bipolar attenuators-inverters) whose off (neutral) position is difficult to retrieve, especially in live situations.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe went for a digitally-controlled analog path where polarity inversion would be at the touch of a button. So, the usefulness of attenuating\/inverting can be realized by turning the pot down, swiftly pressing the inversion button and reopening the level. The zero level is where you expect it, with the pot full down.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOnce we had a clean polarity control, we easily added a mute function offering the benefit of pre- adjusted pot settings ready to be activated at will.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe next step was to bring something extra, useful and creative. There are plenty of analog switches controlled by a clock; but arbitrarily selecting an input with a voltage is less known. Having both control capabilities combined with our specific mixer features creates a unique fusion: welcome to the Mixwitch !\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDepth: 25mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePower: \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e22mA @ +12V \/ 26mA @ -12V \/ 13mA @ +5V\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Klavis","offers":[{"title":"Default Title","offer_id":32235841060958,"sku":"41060958","price":220.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/KlavisMixwitchMixerSwitch.jpg?v=1603492338"},{"product_id":"joranalogue-switch-4","title":"Joranalogue Switch 4","description":"\u003cp\u003eDesigned with and for performing artists, Switch 4 delivers a hands-on signal switching and routing solution for your Eurorack modular synthesizer.\u003c\/p\u003e\n\u003cp\u003eQuickly mute audio signals, trigger envelopes live, select modulation sources on the fly... With custom dual-action toggle switches, an intuitive interface and sturdy construction, Switch 4 will prove just as useful on stage as in the studio.\u003c\/p\u003e\n\u003cp\u003eThe bottom switching section includes four lever-actuated toggle switches, to make or break the signal path between the inputs and outputs. These switches feature a dual action: latched upwards, momentary downwards.\u003c\/p\u003e\n\u003cp\u003eThe four input signals are also sent to the top routing section, where two rotary switches allow you to select the signals to be sent to the matching outputs. Here you'll also find dual-action toggle switches, for added versatility.\u003c\/p\u003e\n\u003cp\u003eFinally, all signal paths are buffered, avoiding signal cuts when shorting a jack during patching or severe loading effects when driving many inputs. The high-end components provide exceptionally low noise and distortion, so Switch 4 can reliably process audio, control voltages and gates\/triggers. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDepth: 30mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePower: 25mA @ +12V \/ 25mA @ -12V\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1594\/2421\/files\/switch-4-user-manual.pdf\" title=\"Joranalogue Switch 4 Manual\" class=\"js-no-transition\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Joranalogue","offers":[{"title":"Default Title","offer_id":32237081722974,"sku":"81722974","price":179.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/JoranalogueSwitch4PerformanceSwitcherRouter.jpg?v=1603856685"},{"product_id":"ritual-electronics-pointeuse-intellijel-1u","title":"Ritual Electronics Pointeuse","description":"\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003ePointeuse is a CV controlled bidirectional analog switch that can be used as a momentary footswitch adapter for Eurorack in 1U format.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cbr\u003ePointeuse\u003cspan\u003e \u003c\/span\u003ehas two states. It either connects\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eIn\/Out\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eto\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eOut\/ In I\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eor to\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eOut\/In II\u003c\/em\u003e. You can change its state by pressing a footswitch (via the included adapter expander), the backlit button or by sending a voltage signal into the Trig In input making the module highly interactive and controllable.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePointeuse\u003cspan\u003e \u003c\/span\u003ebehavior can be momentary (as long as the button is pressed for example) or latching (the signal switches each time the button is pressed).\u003c\/p\u003e\n\u003cp\u003eThe switch has a true bidirectionnal behavior (2:1 or 1:2).\u003c\/p\u003e\n\u003cp\u003eIf no jack is connected to\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eIn\/Out\u003c\/em\u003e, a 5V signal will be present alternatively at\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eOut\/In I\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eOut\/In II\u003c\/em\u003e.\u003c\/p\u003e\n\u003cp\u003ePointeuse\u003cspan\u003e \u003c\/span\u003eis compatible with all sustain pedal or footswitch available, just use\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eOut\/In II\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003einstead of\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eOut\/in I\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eas your main out to reverse the pedal polarity.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 10HP \/ 14HP with Expander\u003c\/li\u003e\n\u003cli\u003eDepth: 35mm \/ 44mm Expander\u003c\/li\u003e\n\u003cli\u003ePower: 20mA @ +12V \/ 11mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Ritual Electronics","offers":[{"title":"Default Title","offer_id":32361133539422,"sku":"33539422","price":168.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/RitualElectronicsPointeuse1Umodule.jpg?v=1611638662"},{"product_id":"intellijel-switched-mult-1u","title":"Intellijel Switched Mult 1U","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSwitched Mult 1U is an expandable, dual-bus, 6-jack passive signal multiplier, with a 3-position switch to facilitate asymmetrical routings — enabling each jack to be a mult of the \u003c\/span\u003e\u003cb\u003eX\u003c\/b\u003e\u003cspan\u003e bus; a mult of the \u003c\/span\u003e\u003cb\u003eY\u003c\/b\u003e\u003cspan\u003e bus; or to be turned off entirely.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA signal multiplier accepts an input signal and routes it to multiple outputs simultaneously. For example, you might want a sequencer’s GATE to trigger two different envelopes — one to control volume and one to control filter frequency. In order to accomplish this, you need a signal multiplier.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIn addition, each Switched Mult 1U features a pair of 3-pin Link connectors on the rear panel. These let you connect other 3-pin Link devices, such as an \u003c\/span\u003e\u003cb\u003e\u003ci\u003eXY I\/O 1U\u003c\/i\u003e\u003c\/b\u003e\u003cspan\u003e module, or even additional \u003c\/span\u003e\u003cb\u003e\u003ci\u003eSwitched Mult 1U\u003c\/i\u003e\u003c\/b\u003e\u003cspan\u003e modules (handy for distributing mults across the width of your case).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 14HP\u003c\/li\u003e\n\u003cli\u003eDepth: 18mm\u003c\/li\u003e\n\u003cli\u003ePower: Passive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Intellijel","offers":[{"title":"Default Title","offer_id":39299080028254,"sku":"80028254","price":55.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/IntellijelSwitchedMult1U.jpg?v=1617569490"},{"product_id":"2hp-switch","title":"2hp Switch - Black","description":"\u003cp class=\"\"\u003eSwitch is a voltage controlled signal router that is great for audio and CV signals. With four inputs and one output, it is ideal for dynamically moving between four disparate elements.\u003c\/p\u003e\n\u003cp class=\"\"\u003eThe active channel can be selected manually, or with CV, allowing for versatile and esoteric results. Whether creating unique modulation patterns or entirely new audio splices, Switch will take your patching to the next stage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 2HP\u003c\/li\u003e\n\u003cli\u003eDepth: 35mm\u003c\/li\u003e\n\u003cli\u003ePower: 31mA @ +12V  \/ 16mA @ -12V\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"2hp","offers":[{"title":"Default Title","offer_id":39339529404510,"sku":"29404510","price":163.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/2HPSWITCH.jpg?v=1620533696"},{"product_id":"transient-1f","title":"Transient Modules 1F","description":"\u003cp\u003eThe 1F is a voltage controlled switch, intended to be ‘one friend’ for your sequencer. Its design has been specially focused on working with sequences, by giving them some randomness, applying transpositions or constant variation over time. For this, 0.1% tolerance resistors have been used to achieve exact unitary gains for precision summing of the v\/oct signals. More detailed info on the demo video.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 4HP\u003c\/li\u003e\n\u003cli\u003eDepth: 27mm\u003c\/li\u003e\n\u003cli\u003ePower: 15mA @ +12V \/ 10mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Transient Modules","offers":[{"title":"Default Title","offer_id":39355664040030,"sku":"64040030","price":135.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/1f.jpg?v=1621891673"},{"product_id":"doepfer-a-151v-quad-sequential-switch-vintage","title":"Doepfer A-151V Quad Sequential Switch Vintage","description":"\u003cdiv\u003e\n\u003cp class=\"p1\"\u003eModule A-151 (Quad Sequential Switch) is like an electronic four-position rotary switch. It includes trigger and reset inputs, four in \/ outputs, and a common out \/ input. Each time a pulse is received at the trigger input socket, the common out \/ input is connected to the next in \/ output. After the fourth in \/ output, the next trigger makes it step back to the first again, and so on. A positive pulse at the reset input switches the out \/ input immediately back to the first in \/ output.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eVoltages in the range -8V...+8V at the O\/I resp. I\/O sockets can be processed by the module. Four LEDs indicate the active in \/ output (ie. the on that is connected to the out \/ input at any particular time).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 4HP\u003c\/li\u003e\n\u003cli\u003eDepth: 35mm\u003c\/li\u003e\n\u003cli\u003ePower: 20mA @ +12V \/ 10mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39375974727774,"sku":"74727774","price":119.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-151VQuadSequentialSwitch.jpg?v=1623371399"},{"product_id":"doepfer-a-151-quad-sequential-switch","title":"Doepfer A-151 Quad Sequential Switch","description":"\u003cp\u003e Module A-151 (Quad Sequential Switch) is like an electronic four-position rotary switch. It includes trigger and reset inputs, four in \/ outputs, and a common out \/ input. Each time a pulse is received at the trigger input socket, the common out \/ input is connected to the next in \/ output. After the fourth in \/ output, the next trigger makes it step back to the first again, and so on. A positive pulse at the reset input switches the out \/ input immediately back to the first in \/ output.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp class=\"p1\"\u003eVoltages in the range -8V...+8V at the O\/I resp. I\/O sockets can be processed by the module. Four LEDs indicate the active in \/ output (ie. the on that is connected to the out \/ input at any particular time).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 4HP\u003c\/li\u003e\n\u003cli\u003eDepth: 35mm\u003c\/li\u003e\n\u003cli\u003ePower: 20mA @ +12V \/ 10mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39375999402078,"sku":"99402078","price":109.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-151QuadSequentialSwitch.jpg?v=1623372101"},{"product_id":"noise-engineering-vice-virga-black","title":"Noise Engineering Vice Virga - Black","description":"\u003cp\u003e8-input, 8-output sequential\/addressable switch with manual, trigger, and CV control, plus three grouping options, multiple switching directions, and randomization.\u003c\/p\u003e\n\u003cp\u003eVice Virga is an 8-input, 8-output sequential\/addressable switch with a plethora of features and extensive patchability. Vice Virga can be configured as a single 8-channel switch, two 4-channel switches, or four 2-channel switches. Equal parts automated patch arranger and performance tool, Vice Virga has loads of switching control options. Whether you want to chain sequencers, swap outputs on an oscillator, remix a trigger pattern, or mix up every connection in a patch just to see what happens, Vice Virga can do it!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli\u003ePower: 40mA @ +12V \/ 20mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cbr\u003e\u003c\/h6\u003e","brand":"Noise Engineering","offers":[{"title":"Default Title","offer_id":39530930700382,"sku":"30700382","price":439.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/NoiseEngineeringViceVirgablack.jpg?v=1634097242"},{"product_id":"divkid-stereo-strip","title":"DivKid Stereo Strip","description":"\u003cp\u003eProduced in collaboration with Befaco, Stereo Strip is a 6HP module built around the idea of a channel strip. It features a stereo VCA with CV control, stereo panner with CV control, 3 way performance mute, EQ, output soft clip analogue limiting plus input and output level switches to work as a stereo line input or stereo line output stage for a modular system. \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003eStereo Strip takes the idea of a channel strip and makes it modular. We hope that by bringing this long-established component of the audio engineering world into the Eurorack environment and by adding CV control over its key parameters that you will find new, creative ways to use it in your patches!\u003c\/p\u003e\n\u003cp\u003eIt features stereo inputs and outputs for audio or CV with EQ, voltage controlled panning, stereo VCA, performable mute and input\/output level switching for Eurorack or line level uses. Abusing the input level switching allows for some musical, modulate able and highly shapeable distortion sounds too.\u003c\/p\u003e\n\u003cp\u003eStereo Strip was designed to be a creative part of a modular patch. Creating stereo images from mono sources, shaping and modulating existing stereo images, synthesizing stereo pseudo ring modulation, sweetening FX with EQ or drastically wave shaping your oscillators, creating send FX routings with benefits or it can simply be used as a channel strip at the end of chain in a patch.\u003c\/p\u003e\n\u003cp\u003eThe addition of line level gain boosting (for the input) or reduction (for the output) allow it to work as a stereo input or output interface for external gear with the advantage of the VCA, panning and the EQ to shape the sound. Experiment with bringing external gear into the Eurorack format and then shape and modulate those sounds them on the way in!\u003c\/p\u003e\n\u003cp\u003eTry patching Stereo Strip anywhere you would place a VCA in a system and\/or explore its EQ and voltage controlled panning, which are rarer additions to the sound sculpting options for the Eurorack format.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 6HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 33mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 63\u003c\/span\u003e\u003cspan\u003emA @ +12V \/ 63\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Befaco","offers":[{"title":"Default Title","offer_id":39687997259870,"sku":"97259870","price":279.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DivKidStereoStrip.jpg?v=1651185891"},{"product_id":"addac-system-addac305-manual-latches","title":"ADDAC System ADDAC305 Manual Latches","description":"\u003cp\u003eThe ADDAC305 Manual Latches is a combination of 8 manual latching switches in a small and elegant module: each button toggles between Gate high \/ Gate low when pressed, outputting a 5V gate signal.\u003c\/p\u003e\n\u003cp\u003eAdditionally 4 of the 8 available latches, sport inputs and can act as manual latching switches, allowing the incoming signal to pass to the output when the button is toggled.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 8HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 25mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003ePower: 1\u003cspan data-mce-fragment=\"1\"\u003e0mA @ +12V \/ 0mA @ -12V\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"ADDAC System","offers":[{"title":"Default Title","offer_id":39775602311262,"sku":"02311262","price":156.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/ADDAC305.jpg?v=1661543106"},{"product_id":"qu-bit-electronix-synapse","title":"Qu-Bit Electronix Synapse","description":"\u003cp class=\"\"\u003eSynapse is a crossfading switch with a signal path that can be rearranged on the fly. Its dynamic routing and mixing functionality make it capable of turning static waveforms into evolving soundscapes.\u003c\/p\u003e\n\u003cp class=\"\"\u003eThe core of Synapse is comprised of four crossfade circuits chained to a sequential switch, all under digital control. This enables many intelligent behaviors that aren't possible in the analog domain. Crossfade positions can be saved in up to eight memory locations for easy recall. These let you create sections within your patch, and travel through them with a single knob – all without repatching. In addition, the switch outputs can be rotated left, right, or randomized, enabling unique spatialization of sounds through effect chains, filters, or other mixers.\u003c\/p\u003e\n\u003cp class=\"\"\u003eSynapse can process CV signals just as well as audio and even generate its own adjustable DC voltage for modulation. A configurable +5V DC offset is normalled to each B input, allowing it to function as a four step sequencer or eight stage stored voltage source without needing any additional modules.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 20HP\u003c\/li\u003e\n\u003cli\u003eDepth: 20mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower: 167mA @ +12V \/ 81mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Qu-Bit Electronix","offers":[{"title":"Default Title","offer_id":39991306092638,"sku":"06092638","price":482.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/Qu-BitSynapse.jpg?v=1686012226"},{"product_id":"transient-modules-1f-demo","title":"Transient Modules 1F (B-stock)","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis is a demo unit and it does NOT come with the original box, it is unused and is in perfect condition. \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe 1F is a voltage controlled switch, intended to be ‘one friend’ for your sequencer. Its design has been specially focused on working with sequences, by giving them some randomness, applying transpositions or constant variation over time. For this, 0.1% tolerance resistors have been used to achieve exact unitary gains for precision summing of the v\/oct signals. More detailed info on the demo video.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 4HP\u003c\/li\u003e\n\u003cli\u003eDepth: 27mm\u003c\/li\u003e\n\u003cli\u003ePower: 15mA @ +12V \/ 10mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Transient Modules","offers":[{"title":"Default Title","offer_id":40129976434782,"sku":"64040030","price":128.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/1f_24b6a722-bfb8-4e61-b2a6-3ab6348fb08f.jpg?v=1698098616"},{"product_id":"addac-system-addac214-vc-rotator","title":"ADDAC System ADDAC214 VC Rotator","description":"\u003cp\u003eThis is our VC Rotator, a stepped routing module for any type of signal (audio, cv, gate, trigger...)\u003c\/p\u003e\n\u003cp\u003eSimilar to a VC switcher but in this case there's the same number of inputs as outputs so, instead of  4 to 1 or 1 to 4, this module is always 4 to 4 but it can be patched for 2 to 2 and 3 to 3 step actions.\u003c\/p\u003e\n\u003cp\u003eAll four inputs get routed to the four outputs depending on the CV and Clock controls and are divided into 4 routing steps:\u003cbr\u003e1. routes all inputs to the same number output: 1:1, 2:2, 3:3, 4:4\u003cbr\u003e2. routes all inputs to an offset of 1: 2:1, 3:2, 4:3, 1:4\u003cbr\u003e3. routes all inputs to an offset of 2: 3:1, 4:2, 1:3, 2:4\u003cbr\u003e4. routes all inputs to an offset of 3: 4:1, 1:2, 2:3, 3:4\u003c\/p\u003e\n\u003cp\u003eDirection determines if the clock input goes forward or backwards.\u003cbr\u003eGoing forward it can be set to 2-3 or 4 steps using the Rotate knob offset, going backwards always sync to 4 steps even if offseted by the Rotate knob.\u003cbr\u003eFor 2 \u0026amp; 3 step action input 1 is normalled to input 3 and input 2 is normalled to input 4.\u003cbr\u003e \u003cbr\u003eReset resets the internal clock to the first step.\u003c\/p\u003e\n\u003cp\u003ePendulum, external sequencing or any complex CV actions can be achieved using the CV input and dedicated attenuverter.\u003c\/p\u003e\n\u003cp\u003e4 leds monitor which input is routed to output 1.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 6\u003cspan data-mce-fragment=\"1\"\u003eHP\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower: 50\u003cspan data-mce-fragment=\"1\"\u003emA +12V \/ 50mA -12V\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ADDAC System","offers":[{"title":"Default Title","offer_id":40269270614110,"sku":"70614110","price":265.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/Addac214VCRotator.jpg?v=1706054982"},{"product_id":"befaco-muxlicer","title":"Befaco Muxlicer","description":"\u003cdiv\u003e\n\u003cdiv class=\"et_pb_module et_pb_text et_pb_text_0  et_pb_text_align_right et_pb_bg_layout_light\"\u003e\n\u003cdiv class=\"et_pb_text_inner\"\u003e\n\u003cp\u003eMuxlicer is a sequential signal processor designed for add a huge range of special functions to your modular setup in the minimum space.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eMuxlicer is divided in three main blocks: a\u003cspan\u003e \u003c\/span\u003eDigital Step Controller, a Gate Generator and an Analog Switch (a.k.a. Mux\/DeMux)\u003c\/p\u003e\n\u003cp\u003eThe module is designed with high “function to HP ratio” philosophy , to have maximum flexibility in minimum space.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 16hp\u003c\/li\u003e\n\u003cli\u003eDepth:\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e35mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower: 45mA @+12V \/ 5mA @-12V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Befaco","offers":[{"title":"Default Title","offer_id":40707757310046,"sku":"57310046","price":337.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/BelfacoMuxlicer.jpg?v=1713553378"},{"product_id":"klavis-mixwitch-black","title":"Klavis Mixwitch - Black","description":"\u003cdiv class=\"uk-margin uk-dropcap\"\u003e\n\u003cp\u003eFocused versatility seems an oxymoron when describing the features that led us to design the Mixwitch.\u003c\/p\u003e\n\u003cp\u003eWith only a pinch of mixing, inverting and controlled switching, we brew up a plethora of combinations and uses.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is voltage processing magic!\u003c\/p\u003e\n\u003cp\u003eThe Mixwitch design comes from a frustration with attenuvertors (bipolar attenuators-inverters) whose off (neutral) position is difficult to retrieve, especially in live situations.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe went for a digitally-controlled analog path where polarity inversion would be at the touch of a button. So, the usefulness of attenuating\/inverting can be realized by turning the pot down, swiftly pressing the inversion button and reopening the level. The zero level is where you expect it, with the pot full down.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOnce we had a clean polarity control, we easily added a mute function offering the benefit of pre- adjusted pot settings ready to be activated at will.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe next step was to bring something extra, useful and creative. There are plenty of analog switches controlled by a clock; but arbitrarily selecting an input with a voltage is less known. Having both control capabilities combined with our specific mixer features creates a unique fusion: welcome to the Mixwitch !\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDepth: 25mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePower: \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e22mA @ +12V \/ 26mA @ -12V \/ 13mA @ +5V\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Klavis","offers":[{"title":"Default Title","offer_id":40800282214494,"sku":"82214494","price":230.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/KlavisMixwitchBlack.jpg?v=1715110140"},{"product_id":"doepfer-a-182-4-dual-rotary-switches","title":"Doepfer A-182-4 Dual Rotary Switches","description":"\u003cp\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eModule A-182-4 is a simple passive module that contains two mechanical rotary switches with 4 positions each. According to the position of the control knob socket 1, 2, 3 or 4 is connected to the common socket C.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan face=\"Arial\" size=\"2\" data-mce-fragment=\"1\"\u003e\u003cspan\u003eAs the module is fully passive it works bidirectional, i.e. the sockets 1...4 can be inputs and then C is the output. The other way round C can be the input and the sockets 1...4 are the outputs.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan face=\"Arial\" size=\"2\" data-mce-fragment=\"1\"\u003e\u003cspan\u003eBy means of an internal jumper the terminals C of both switches can be connected. That way the module can be used as kind of a miniature 4x4 matrix. Rotary switch A is e.g. used to select one of the four sockets 1...4 as input and this signal is sent to one of the four sockets 1...4 of switch B. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" size=\"2\" face=\"Arial\" data-mce-fragment=\"1\"\u003eWidth: 4HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" size=\"2\" face=\"Arial\" data-mce-fragment=\"1\"\u003eDepth: 20mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" size=\"2\" face=\"Arial\" data-mce-fragment=\"1\"\u003ePower: Passive\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":40804719525982,"sku":"19525982","price":112.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/DoepferA-182-4DualRotarySwitches.jpg?v=1715210618"},{"product_id":"dmmdm-droid-master","title":"Der Mann mit der Maschine DROID Master","description":"\u003cp\u003eThe DROID master is the central module in your DROID setup. In any Droid setup you need one master module. You can use it stand alone or with up to 16 controllers and up to one\u003cspan\u003e \u003c\/span\u003eG8\u003cspan\u003e \u003c\/span\u003eand one\u003cspan\u003e \u003c\/span\u003eX7\u003cspan\u003e \u003c\/span\u003eexpander attached. Currently there are six different controllers available:\u003cspan\u003e \u003c\/span\u003eB32,\u003cspan\u003e \u003c\/span\u003eP4B2,\u003cspan\u003e \u003c\/span\u003eP2B8,\u003cspan\u003e \u003c\/span\u003eP10,\u003cspan\u003e \u003c\/span\u003eS10, and\u003cspan\u003e \u003c\/span\u003eM4.\u003c\/p\u003e\n\u003cp\u003eThe DROID master has eight CV inputs and eight CV outputs, all of them very precise in voltage and timing. The range is from -10V to +10V.\u003c\/p\u003e\n\u003cp\u003eShipping includes a micro SD card, a micro SD card reader for USB 2, a ribbon cable for connecting to a Eurorack (Doepfer) compatible modular system with +\/- 12V and four 3 mm mounting screws.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe DROID is a very flexible generic CV processor. It has 8 CV inputs and 8 CV outputs, all ranging from -10V to +10V. The DROID can do almost any CV task you can imagine, such as sequencing, melody generation, slew limiting, quantizing, switching, mixing, working on clocks and triggers, creating envelopes and LFO or other fancy voltages, or any combination of these at the same time. While doing this, is very precise both in voltage and in timing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 8HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 40mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 154\u003c\/span\u003e\u003cspan\u003emA @ +12V \/ 15\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Der Mann mit der Maschine","offers":[{"title":"Default Title","offer_id":41330668699742,"sku":"68699742","price":565.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/DMMDM_DROID_master_colour_panel.jpg?v=1735670547"},{"product_id":"dmmdm-droid-master-18-copy","title":"Der Mann mit der Maschine DROID Master 18","description":"\u003cp class=\"lead wrap\"\u003eDROID\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"highlight\"\u003eMASTER18\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e- Compact Universal CV Processor with MIDI\/USB\u003c\/p\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"highlight\"\u003eMASTER18\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eis a very flexible generic CV processor.\u003c\/p\u003e\n\u003cp\u003eYou can think of the\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"highlight\"\u003eMASTER18\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eas a smaller and cheaper version of the\u003cspan\u003e \u003c\/span\u003eDROID MASTER\u003cspan\u003e \u003c\/span\u003ewithout CV inputs and LEDs, but with an integrated USB and MIDI, six additional gate jacks, two of which are inputs and four are outputs.\u003c\/p\u003e\n\u003cp\u003eDetails:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt has 8 CV output jacks with a voltage range from -10 V to +10 V, driven by highly accurate low jitter 16 bit DA converters,\u003c\/li\u003e\n\u003cli\u003e2 gate inputs switching at 0.1 V\u003c\/li\u003e\n\u003cli\u003e4 gate ouputs switching between 0 V and 5 V\u003c\/li\u003e\n\u003cli\u003e2 MIDI interfaces via MIDI standard B (mini jack)\u003c\/li\u003e\n\u003cli\u003eMicroSD card reader and a button for reloading the MicroSD card\u003c\/li\u003e\n\u003cli\u003eUSB C to access the SD card from your computer or to send\/receive MIDI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"highlight\"\u003eMASTER18\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ecomes with two interesting bonus features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt can be connected to the\u003cspan\u003e \u003c\/span\u003eSinfonion\u003cspan\u003e \u003c\/span\u003eas a follower of the Harmonic Sync.\u003c\/li\u003e\n\u003cli\u003eIt has an integrated tuning device for VCOs (can measure their frequency).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"highlight\"\u003eMASTER18\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eis a good choice if you intend to just create CVs and don't need to process incoming CVs. It’s perfect for building sequencers and MIDI to CV converters.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"highlight\"\u003eMASTER18\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ecan do almost any CV task you can imagine, such as sequencing, melody generation, slew limiting, quantizing, switching, mixing, working on clocks and triggers, creating envelopes and LFO or other fancy voltages, or any combination of these at the same time. While doing this, is very precise both in voltage and in timing.\u003c\/p\u003e\n\u003cp\u003eYou can attach several different DROID controller modules, such as the\u003cspan\u003e \u003c\/span\u003eE4, the\u003cspan\u003e \u003c\/span\u003eP2B8, the\u003cspan\u003e \u003c\/span\u003eP10, the\u003cspan\u003e \u003c\/span\u003eB32, the\u003cspan\u003e \u003c\/span\u003eP4B2\u003cspan\u003e \u003c\/span\u003eor the\u003cspan\u003e \u003c\/span\u003eM4\u003cspan\u003e \u003c\/span\u003ein order to get direct hands on access to all parameters and values of these patches.\u003c\/p\u003e\n\u003cp\u003eEasily create your desired DROID patch utilizing our simple and easy-to-use editor with built in tutorials - the\u003cspan\u003e \u003c\/span\u003eDROID Forge. It is available for Windows and Mac (both Apple Silicon and Intel).\u003cbr\u003eThe file created with the DROID Forge is a simple text file named \"droid.ini\" and needs to be loaded on the micro SD card that goes into the\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"highlight\"\u003eMASTER18\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHint: If you'd rather use a simple text editor to alter the \"droid.ini\" pick one you like and go for it.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe building blocks of a DROID patch are called circuits. Every type of circuit performs some basic task. Just like a Eurorack module each ciruit has inputs and outputs. You can wire these either directly to the eight inputs and\/or outputs and even connect them internally. Every parameter can be CV controlled. You can attach up to 16 controllers to your DROID. Controllers have faders, buttons and potentiometers and allow you to map assign to any parameter or function you like. This gives you direct control over your DROID patch and allows you to create you own instrument.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 6HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 40mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 73\u003c\/span\u003e\u003cspan\u003emA @ +12V \/ 7\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Der Mann mit der Maschine","offers":[{"title":"Default Title","offer_id":41330671419486,"sku":"71419486","price":535.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/DMMDM_DROID_master_18.jpg?v=1733788197"},{"product_id":"jolin-lab-rosa","title":"Jolin Lab Rosa","description":"\u003cp\u003e\u003cstrong\u003eROSA\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a multi-mode crossfader, scanner, and switcher module designed to morph between up to four inputs and outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ewhy\u003c\/strong\u003e\u003cbr\u003e• To morph smoothly between multiple inputs.\u003cbr\u003e• To route a single input across multiple outputs.\u003cbr\u003e• To modulate signals dynamically with flexible scanning and control.\u003cbr\u003e• To switch between signals or outputs for performance variations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ewith\u003c\/strong\u003e\u003cbr\u003e• LFOs and Envelopes: Morph modulation sources across various destinations.\u003cbr\u003e• Audio Sources: Transition between different oscillators, filters, or effects.\u003cbr\u003e• Quadraphonic Systems: Distribute signals across multiple speakers for immersive sound.\u003cbr\u003e• Rhythmic Triggers: Switch between trigger patterns or effects to create evolving sequences.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ehow\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eROSA\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eoperates in three distinct modes that allow you to shape and route signals in various ways:\u003cbr\u003e•\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eScan Mode\u003c\/strong\u003e: In this mode, you can seamlessly morph between up to four inputs. The scanning circuit moves progressively from IN1 to IN4, with the option to loop back to IN1 for continuous transitions. By adjusting the KNEE control, you can choose whether the transitions are smooth and gradual or sharp and instantaneous, making it perfect for creating evolving textures or switching between sounds on the fly.\u003cbr\u003e•\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWave Mode\u003c\/strong\u003e: In this configuration, the four VCAs operate independently. Each VCA still follows the same control from the scanning circuit, but they are kept separate. This allows you to modulate four different channels independently, creating complex dynamic changes in your patch.\u003cbr\u003e•\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePass Mode\u003c\/strong\u003e: Here, a single input is distributed across up to four outputs. If more than an input is plugged, they will be mixed together. This is ideal for sending the same signal to multiple destinations, like quadraphonic speaker setups or different effects chains. The transition between outputs can be smooth or sharp, giving you full control over how the signal moves between outputs.\u003c\/p\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eKNEE control\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eshapes how the transitions behave in all modes, letting you switch from soft fades to abrupt jumps, depending on your creative needs.\u003cbr\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSHUT input\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emutes all VCAs simultaneously, making it ideal for performance control or rhythmic muting. Since the VCAs are linear, amplitude control can be gradual or instantaneous, depending on the nature of the CV input.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 6HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 30mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePower: 120mA @ +12V \/ 100mA @ -12V\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jolin Lab","offers":[{"title":"Default Title","offer_id":41355432525918,"sku":null,"price":455.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/JolinLabRosa.jpg?v=1735337633"},{"product_id":"divkid-mutes-mk2","title":"DivKid Mutes Mk2","description":"\u003cp\u003eMutes goes above and beyond basic muting by allowing you to split groups of signals to multiple destinations, making it great for FX dub performing and varied signal routing.\u003c\/p\u003e\n\u003cp\u003eVactrols on the circuit gives to the switching a pleasing decay for both audio and modulation as well a totally click free muting.\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMK2:\n\u003cul\u003e\n\u003cli\u003e\n\u003ci\u003eThis new unit uses VCA based technology that offers improvements in noise floor \/ bleed and the signal integrity passing through the channels. It also retains the well loved response and feel of the original click free, vactrol style muting and the performable 3 way momentary - off - on switches.\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eMutes mk2 also now comes with a 1U alternative panel to sideways mount the module in compatible, Intellijel format 1U rows and cases. The panel is included in the box\/kit with the normal 3U version along with the Befaco Banananut to change the panel over.\u003c\/i\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThree-position switch: MOMENTARY signal pass-through (it springs back to the center when released); OFF (or muted) in the center; and ON to the right.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 4HP (also includes \u003cmeta charset=\"utf-8\"\u003e \u003ci\u003e1U alternative panel)\u003c\/i\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: \u003cmeta charset=\"utf-8\"\u003e32mm (including power connector)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 20\u003c\/span\u003e\u003cspan\u003emA@ +12V \/ 0\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Befaco","offers":[{"title":"Default Title","offer_id":41700579541086,"sku":"79541086","price":178.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/DivKid_Mutes_MK2_3U.jpg?v=1747251836"},{"product_id":"toppobrillo-matrixplexer-black-knobbed","title":"Toppobrillo Matrixplexer - Black (Knobbed)","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e4x4 2D scanning matrix mixer with axis-independent scan modes, slopes and automative features.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis module is a mutant future cousin to the Mixiplexer we made back in 2012, And adds a ton of things I had wanted to add way back when.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSelect and animate input and output mixes for movement, reveals, spatialization and syncopative rhythms…Sequence mixes and effects.. add space and time to feedback work.. Syncopate swells and panning with a clock source.. the list goes on..\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTransport\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eX and Y select active cross-points, or channels, in the matrix-\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eScan mode is exclusive, and scan position centroid is mapped to corresponding channel according to slider position and input CV.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eStack mode opens all channels in selected row or column sequentially, according to slider and CV.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eScroll Mode invokes internal “through zero” LFOs that scan the matrix continuously and seamlessly in any direction, at a rate set by the Sliders and CV.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eShape knob and CV adjust the crossfade slope between channels, anywhere from hard switching to smooth linear crossfades , extending to gating multiple channels simultaneously.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Clock input allows each mode to be sync’d with an external clock, synchronizing movement in the Matrixplexer with perhaps other timing elements in a patch.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eI\/O\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eThere are 4 DC coupled inputs and 4 output mixes with mute switches. Low noise linear VCAs handle the audio, post input attenuators.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRow and Mix CVs add to X and Y scan CVs and will gate respective channels.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eExpansion\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eDigital expansion is possible via rear header. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eKnobs\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eKnobless trimmer or knobbed version available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 24HP\u003c\/li\u003e\n\u003cli\u003eDepth: 30mm\u003c\/li\u003e\n\u003cli\u003ePower: 140mA @+12V \/ 65mA @-12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Toppobrillo","offers":[{"title":"Default Title","offer_id":42078860312670,"sku":null,"price":848.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/Toppobrillo_Matrixplex_Black_with_Knobs.jpg?v=1759517929"},{"product_id":"toppobrillo-matrixplexer-silver-knobbed","title":"Toppobrillo Matrixplexer - Silver (Knobbed)","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e4x4 2D scanning matrix mixer with axis-independent scan modes, slopes and automative features.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis module is a mutant future cousin to the Mixiplexer we made back in 2012, And adds a ton of things I had wanted to add way back when.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSelect and animate input and output mixes for movement, reveals, spatialization and syncopative rhythms…Sequence mixes and effects.. add space and time to feedback work.. Syncopate swells and panning with a clock source.. the list goes on..\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTransport\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eX and Y select active cross-points, or channels, in the matrix-\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eScan mode is exclusive, and scan position centroid is mapped to corresponding channel according to slider position and input CV.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eStack mode opens all channels in selected row or column sequentially, according to slider and CV.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eScroll Mode invokes internal “through zero” LFOs that scan the matrix continuously and seamlessly in any direction, at a rate set by the Sliders and CV.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eShape knob and CV adjust the crossfade slope between channels, anywhere from hard switching to smooth linear crossfades , extending to gating multiple channels simultaneously.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Clock input allows each mode to be sync’d with an external clock, synchronizing movement in the Matrixplexer with perhaps other timing elements in a patch.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eI\/O\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eThere are 4 DC coupled inputs and 4 output mixes with mute switches. Low noise linear VCAs handle the audio, post input attenuators.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRow and Mix CVs add to X and Y scan CVs and will gate respective channels.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eExpansion\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eDigital expansion is possible via rear header. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eKnobs\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eKnobless trimmer or knobbed version available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 24HP\u003c\/li\u003e\n\u003cli\u003eDepth: 30mm\u003c\/li\u003e\n\u003cli\u003ePower: 140mA @+12V \/ 65mA @-12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Toppobrillo","offers":[{"title":"Default Title","offer_id":42078860574814,"sku":null,"price":848.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/Toppobrillo_Matrixplex_White_with_Knobs.jpg?v=1759517929"},{"product_id":"vostok-instruments-halo","title":"Vostok Instruments Halo","description":"\u003cp class=\"\" data-rte-preserve-empty=\"true\"\u003eHalo is a compact quad LFO designed to provide a large amount of modulation in 10HP.\u003c\/p\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003eThe module generates up to 16 simultaneous signals covering a wide range from classic triangle and square waves to complex logic-based sources. \u003c\/p\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003eEach channel is built on a CV-controlled analog core and offers two selectable frequency ranges, finely tuned to cover most applications. \u003c\/p\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003eThe Logic section creates new waveforms from each channel pair using analog boolean circuits for AND, OR, and XOR operations, as well as a mix of both channels.\u003c\/p\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003eHalo counts with the classic Vostok design layout, making it friendly and accessible to any user, yet also deep and powerful in functionality, allowing you to create an entire array of modulation goodness in a compact form.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 10HP\u003c\/li\u003e\n\u003cli\u003eDepth: 30mm (Including Power Cable)\u003c\/li\u003e\n\u003cli\u003ePower: 50mA @ +12V \/ 50mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vostok Instruments","offers":[{"title":"Default Title","offer_id":42640103637086,"sku":"03637086","price":312.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/Vostok_Instruments_Halo.jpg?v=1775941290"},{"product_id":"doepfer-a-180-6-triple-adjustable-buffer-cv-source","title":"Doepfer A-180-6 Triple Adjustable Buffer \/ Control Voltage Source","description":"\u003cp\u003eA-180-6 is a triple voltage buffer module with separately adjustable levels for each unit. The maximum amplification is 1 (factory setting) but can be changed to 2 (by installing a solder bridge).\u003cbr\u003eInputs 2 and 3 are normalled to the preceding unit. That way the module can be used for the distribution of only one signal (inputs 2 and 3 are open) or for up to three separate signals (with all inputs connected).\u003cbr\u003eFor input 2 the kind of normalling can be changed so that the (potentionally attenuated) output voltage of unit 1 is used as default signal for input 2 (by altering a solder bridge). In this case level control 1 affects also the units 2 and 3 provided that the input sockets 2 and 3 are not wired.\u003cbr\u003eInput socket 1 can be normalled to +5V by means aof a jumper. In this case the module can be used also as control voltage source (replacement for the obsolete module A-176). The output voltage range is 0...+5V or 0...+10V according to the selected maximum amplification (1 or 2).\u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":42737300570206,"sku":"00570206","price":111.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/Doepfer_A-180-6.jpg?v=1777932164"}],"url":"https:\/\/nightlife-electronics.com\/en-us\/collections\/switch.oembed?page=2","provider":"Nightlife Electronics","version":"1.0","type":"link"}