{"title":"Syntonie","description":"","products":[{"product_id":"syntonie-animate","title":"Syntonie Animate","description":"\u003cp\u003esine and square waveform outputs, with 4 outputs 90 degrees apart for each waveform.\u003c\/p\u003e\n\u003cp\u003eIt features a coarse tune to set initial frequency and a fine tune so it can be set to slowly scrolling up and down when used at audio rate. CV inputs allows to modulate the frequency using an external signal, it is normalized to 1V to widen the frequency range available from the coarse tune.\u003c\/p\u003e\n\u003cp\u003eFrequency range: 0.01Hz to 600Hz\u003c\/p\u003e\n\u003cp\u003eAn 8HP expander allows to add 4 more waveforms (saw, trapezoid, shark and chainsaw).\u003c\/p\u003e\n\u003cp\u003ePowered through standard Eurorack connector or DC barrel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 8HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 42mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 90\u003c\/span\u003e\u003cspan\u003emA@ +12V \/ 0\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":41733058592862,"sku":"58592862","price":419.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/SyntonieAnimate.jpg?v=1747939230"},{"product_id":"syntonie-vu001c","title":"Syntonie VU001C","description":"\u003cp\u003eVU001C features 3 video distribution amplifier channels, aimed towards distributing Component video to multiple monitors\/capture devices, but can also be used to distribute 3 independents Composite or sync signals.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003eInputs: – 75 ohm, RCA\u003c\/li\u003e\n\u003cli\u003eOutputs: – 75 ohm, RCA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 8HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 20mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 55\u003c\/span\u003e\u003cspan\u003emA@ +12V \/ 15\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":41733102305374,"sku":"02305374","price":275.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/Syntonie_VU001C.jpg?v=1747939950"},{"product_id":"syntonie-animate-expander","title":"Syntonie Animate Expander","description":"\u003cp\u003eAdds 4 additional waveforms to Animate: saw, trapezoid, shark and chainsaw.\u003c\/p\u003e\n\u003cp\u003eSaw is twice the frequency of other waveforms and are 180° degrees apart, all other waveforms are 90° degrees apart.\u003c\/p\u003e\n\u003cp\u003eConnected to Animate through 2x 4pin connector, the core module provides power and triangle\/square waveforms used to derive the expander waveforms.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 8HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 15mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 40\u003c\/span\u003e\u003cspan\u003emA@ +12V \/ 0\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":41733110726750,"sku":"10726750","price":199.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/Syntonie_Animate_EXP.jpg?v=1747939560"},{"product_id":"syntonie-cadrans","title":"Syntonie Cadrans","description":"\u003cp\u003eCadrans (french for dials) is a triple multiplier with three identical channels, featuring manual control as well as voltage control over the amplitude, as well as a mode switch to select one of the three different modes :\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eVCA\/XFADE : in this mode, Cadrans works as a voltage controlled amplifier when only one signal is connected to IN1 or IN2. When connected to IN1, the signal fades from maximum value to 0V (black) and when connected to IN2, the signal fades from maximum value to +1V (white). When two signals are going to IN1 and IN2, Cadrans acts as a crossfader, smoothly fading from one signal to the other.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe two other modes are four quadrant multipliers, in which the signal present at IN1 will be attenuated before being inverted, in a similar way as an attenuverter works. In those modes, IN2 is disabled.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e4Q BI : this mode expects a bipolar signal (ie : +\/-1V) and will output a bipolar signal. It is also possible to use it with a more standard unipolar signal (+1V), though the output will be bipolar as well, meaning that the inverted version of the signal will be under black level (0V). This can be useful to bring some negative space in a patch, as this mode will fade to black 2x faster than the VCA mode.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4 UNI : this mode expects a unipolar signal (+1V) and will output a unipolar signal (+1V), which means that, as opposed to the 4Q BI mode, the inverted version of the signal will stay in the 0V to 1V range, with a midpoint at grey level.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSince Cadrans features three channels, it can be used to process RGB signals, fading them to black\/white, crossfading them with another set of RGB signals, or invert them. Then those three channels are independant and can be used on their own, for example, to process H and V signals using two channels, and use the third one as a crossfader between the two first channels to produce 2D shapes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 12HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 42mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 170\u003c\/span\u003e\u003cspan\u003emA@ +12V \/ 0\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":41733125767262,"sku":"25767262","price":499.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/SyntonieCadrans.jpg?v=1747939893"},{"product_id":"syntonie-cbv001","title":"Syntonie CBV001","description":"\u003cp\u003eCBV001 is a circuit bent video enhancer meant to process Composite video. It generates effects ranging from soft color shifts to heavy distortion, with a CV input and attenuator allowing to control the contrast with an external control voltage.\u003cbr\u003eNTSC\/PAL compatible.\u003c\/p\u003e\n\u003cp\u003eAssembled module, comes with a 16-to-10pin power cable.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 12HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 15mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 40\u003c\/span\u003e\u003cspan\u003emA@ +12V \/ 0\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":41733168660574,"sku":"68660574","price":235.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/SyntonieCBV001.jpg?v=1747940243"},{"product_id":"syntonie-vu001b","title":"Syntonie VU001B","description":"\u003cp\u003eUpdated version of VU001, retain the same features as the previous version with smaller depth.\u003c\/p\u003e\n\u003cp\u003eNo more sync termination jumper as the rear RCA input is now buffered, a single jumper is used to either:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003edistribute the signal at the front RCA input to the 4 front RCA outputs and rear RCA output\u003c\/li\u003e\n\u003cli\u003edistribute the signal at the rear RCA input to the 4 front RCA outputs as well as the rear RCA output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIdeal to distribute a Composite video signal to multiple monitors\/capture devices, or sync signal across multiple modular systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003eInputs: - 75 ohm, RCA (front) - 75 ohm, RCA (back)\u003c\/li\u003e\n\u003cli\u003eOutputs: - 75 ohm, RCA (front), - 75 ohm, RCA (back)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 4HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 20mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 51\u003c\/span\u003e\u003cspan\u003emA@ +12V \/ 15\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":41733189075038,"sku":"89075038","price":179.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/Syntonie_VU001B.jpg?v=1747940752"},{"product_id":"syntonie-courbes","title":"Syntonie Courbes","description":"\u003cp\u003eCourbes (french for curves) is a triple exponential and logarithmic shaper with three identical channels, featuring manual control as well as voltage control over the curve of the input signal, smoothly transitioning from exponential to linear to logarithmic.\u003c\/p\u003e\n\u003cp\u003eMost obvious use is to shape ramps and oscillators to produce curved shapes like four branched stars (exponential) and ellipses (logarithmic). However, using Courbes on more complex signals will be akin to gamma correction, allowing to expand the contrast in exponential, making the dark parts of the signal darker, as well as compressing the contrast in logarithmic, making the dark parts of the signal brighter. It is different than brightness control, which will move the whole signal towards black or white level, thus loosing information once the signal exceed the black or white level.\u003c\/p\u003e\n\u003cp\u003eIt is also possible to use Courbes as a sine\/antisine wave shaper, by sending the same signal at the input and CV input, with the CV attenuverter allowing to transition from sine (max position) to antisine (min position). On a complex signal, the sine shaping will translate into the dark parts of the signal getting darker, and the bright parts of the signal brighter, and the antisine will make the dark parts brighter and the bright parts darker.\u003c\/p\u003e\n\u003cp\u003eSince Courbes features three channels, it can be used to process RGB signals, allowing to finely tune the gamma of each R, G and B signals. Then those three channels are independant and can be used to process H and V ramp\/oscillator signals separately, allowing for precise shaping of the curve of the resulting shape.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 8HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 42mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 200\u003c\/span\u003e\u003cspan\u003emA@ +12V \/ 0\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":41733199167582,"sku":"99167582","price":455.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/Syntonie_Courbes.jpg?v=1747940517"},{"product_id":"syntonie-stable","title":"Syntonie Stable","description":"\u003cp\u003eStable is a processing amplifier and glitch stabilizer supporting the following Composite (SD) \u0026amp; Component (SD\/HD) formats:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003e288p50\u003c\/li\u003e\n\u003cli\u003e240p59.94\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e576i50 (PAL)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e480i59.94 (NTSC)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e576p50\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e480p59.94\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e720p50\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e720p59.94\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e720p60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1080i50\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1080i59.94\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1080i60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1080p23.98\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1080p24\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1080p25\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1080p29.97\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1080p30\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe format is detected and selected automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eProcessing Amplifier\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe processing amplifier part gives control over contrast, brightness, hue and saturation of a Composite video signal, allowing for fine tuning of each of the parameters manually. In addition to manual controls, CV inputs and attenuverters on each of the parameters opens Stable to external modulation, from DC to video rate signals, so it can be easily integrated in the 1V video ecosystem. To make the integration with video generators even easier, a sync output at the back of Stable can be used to sync modules that requires it.\u003c\/p\u003e\n\u003cp\u003eInternal modulation is also possible, thanks to the two 1V jack outputs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003epre-processor output: unprocessed video input signal, resulting in a solarization effect when used to modulate contrast\u003c\/li\u003e\n\u003cli\u003epost-processor output: processed video signal, creating feedback loops when patched into the processor parameters, which generate effects typical of analog video glitch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSelf modulation makes Stable really powerful on its own, and using other processing modules in the loop extends the possibilities further.\u003cbr\u003e\u003cbr\u003eIt is also possible to process Y from Component video, however, only the black and white information will be processed (since the color information is contained in the Pb and Pr signals). In this case, the all-pass filter used for hue shift will act as an enhancer type of effect, with the saturation knob controlling the intensity of the enhance. \u003cbr\u003eThe chroma filtering switch can be set to off to avoid unwanted filtering, which results in a sharper picture, especially in HD formats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eGlitch Stabilizer\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eComposite video glitch processors can create very distinct effects, mainly because the black and white (Luma) and colors (Chroma) information are merged into a single video signal, which will affect each other when altered with such devices. However, one issue is that the synchronization signal is also embedded with Luma and Chroma, meaning that it is also altered, and if sync is too degraded, the receiving device (LCD monitor, video projector, capture card, etc…) may not be able to decode it properly, resulting in drops\/blue screen.\u003cbr\u003e\u003cbr\u003eStable solves that by extracting the synchronization from the clean signal present at the processor input, and later re-insert it to the glitched signal in the stabilizer part, along with adequate clipping and blanking, ensuring a stable signal in all instances. A similar technique is used in the processor part, meaning that both RCA outputs will provide a valid signal, regardless of what’s happening to the video content.\u003cbr\u003e\u003cbr\u003eIt is also possible to use the stabilizer part to process Composite\/Component Y video with 1V compliant video modules, by connecting one of the processor outputs into such a module, and the output of the module back to the stabilizer jack input. It can also be processed with audio modules, however the bandwidth will probably be too limited, resulting in the color and finer details to be filtered.\u003cbr\u003e\u003cbr\u003eThen it's important to note that Stable isn't a TBC, so it needs a stable signal at the processor input, which means that it may not work properly with devices like VCRs or if the signal at the processor input is glitched\/out of spec.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFurthermore, the stabilizer part will correct hard glitch effects caused by invalid sync (ie: pictures bending horizontally, scrolling up\/down\/left\/right), where a TBC may be able to display some of it. Since Stable signal path is purely analog, it won't \"freeze\" the picture or part of it as a TBC generally does with really distorted signals.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 16HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 42mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 310\u003c\/span\u003e\u003cspan\u003emA@ +12V \/ 0\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":41733225087070,"sku":"25087070","price":699.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/Syntonie_Stable.jpg?v=1747941690"},{"product_id":"syntonie-detail","title":"Syntonie Détail","description":"\u003cp\u003eDétail is a Composite\/Component video filter.\u003c\/p\u003e\n\u003cp\u003eInspired by old school video detailers, it is based around a lowpass\/highpass filter, which can either soften\/blur or enhance\/sharpen the incoming video signal.\u003c\/p\u003e\n\u003cp\u003eIt outputs a fully compliant Composite\/Component Y video signal, meaning that the effects it produces can be pushed to the extreme without the need for stabilization (unlike most analog glitch video devices). However, it needs an in-spec signal at its input to operate correctly (a video signal coming from a glitch device or VCR will need to be stabilized prior to Détail).\u003c\/p\u003e\n\u003cp\u003eIt features three main parameters, with video rate voltage control and attenuverter for each:\u003c\/p\u003e\n\u003cp\u003e- Frequency: sets the cutoff frequency of the filter, ranging from 1MHz to 10MHz\u003c\/p\u003e\n\u003cp\u003e- Resonance: feeds back the output of the filter into its input, allowing for negative or positive feedback for various effects.\u003c\/p\u003e\n\u003cp\u003e- Dry\/Wet: crossfades between the unprocessed video input and the output of the filter, so the intensity of the blur or sharpen can be set independently from the frequency and resonance.\u003c\/p\u003e\n\u003cp\u003eThe Luma Filter switch toggles between:\u003c\/p\u003e\n\u003cp\u003e- Sharp: the filter is set to highpass and the output of the filter mixed with the input signal, resulting in a high frequency boost, enhancing the finer details of the picture. As the frequency decreases, more content of the input signal gets enhanced, resulting in an effect typical of analog video filters. In sharp mode, negative resonance creates a \"edge feedback\" effect, and positive resonance can create hue aberrations in Composite when the cutoff frequency gets close the subcarrier frequency (3-4MHz).\u003c\/p\u003e\n\u003cp\u003e- Blur: the filter is set as a lowpass, thus removing the finer details of the picture. As the cutoff frequency of the filter decrease, the video gets more and more blurry. The resonance isn't as impressive as in sharp mode, however negative resonance can create some nice \"ghosting effect\", where part of the pictures disappears, and the remaining parts have this glowing halo.\u003c\/p\u003e\n\u003cp\u003eThe Chroma Filter switch allows to separate luma from chroma when set to ON, in order to apply filtering only to the luma.\u0026amp;nbsp;\u003cbr\u003eHowever, it can be toggled to OFF, in order to process the full Composite video signal (luma + chroma).\u0026amp;nbsp;When processing a full Composite video signal, the sharp mode can act as a hue boost \/shift in addition to the sharpening when the filter cutoff is close to subcarrier frequency. And in blur mode, the color information will be removed in addition to the blurring caused by the filter.\u003cbr\u003eAnother use case for setting the chroma filter to OFF is when processing Component, to avoid any frequency\/detail loss incurred by the chroma filter (especially in HD).\u003c\/p\u003e\n\u003cp\u003eDétail features two 1V outputs over minijack:\u003c\/p\u003e\n\u003cp\u003e- Pre-filter output: buffers and scales the signal present at the Video IN, useful for luma-based modulation.\u003cbr\u003e- Post-filter output: buffers and scales the output of the filter, allowing for additional feedback when patching it into the CV inputs.\u003c\/p\u003e\n\u003cp\u003eOf course, the CV IO offers a lot of possibilities when combined with other modules.\u003cbr\u003eA couple examples:\u003c\/p\u003e\n\u003cp\u003e- Luma key modulation using a key generator (like Seuils) on the pre-filter output.\u003c\/p\u003e\n\u003cp\u003e- Using Détail as an input module with a built-in filter to further process the signal in the 1V RGB realm (with the help of 1V processing modules and an RGB encoder like VU007B).\u003c\/p\u003e\n\u003cp\u003e- Filtered modulation on Stable parameters, to use either the blur mode to get some smooth hue shift, or the edge feedback effect of the sharp mode for that hard edged modulation.\u003c\/p\u003e\n\u003cp\u003eA RCA Sync output at the rear of the module allows to route the external video sync to a sync generator or any signal generator module with RCA sync IO.\u003c\/p\u003e\n\u003cp\u003eIt supports the following Composite (SD) and Component (SD\/HD) formats:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e288p50\u003cbr\u003e240p59.94\u003cbr\u003e576i50 (PAL)\u003cbr\u003e480i59.94 (NTSC)\u003cbr\u003e576p50\u003cbr\u003e480p59.94\u003cbr\u003e720p50\u003cbr\u003e720p59.94\u003cbr\u003e720p60\u003cbr\u003e1080i50\u003cbr\u003e1080i59.94\u003cbr\u003e1080i60\u003cbr\u003e1080p23.98\u003cbr\u003e1080p24\u003cbr\u003e1080p25\u003cbr\u003e1080p29.97\u003cbr\u003e1080p30\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe format is detected and selected automatically.\u003c\/p\u003e\n\u003cp\u003eCan be powered through standard Eurorack 16pin connector or DC barrel connector.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 12HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 42mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 200\u003c\/span\u003e\u003cspan\u003emA@ +12V \/ 0\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":41733235245150,"sku":"35245150","price":559.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/Syntonie_Detail.jpg?v=1747941203"},{"product_id":"syntonie-entree","title":"Syntonie Entrée","description":"\u003cp\u003eEntrée, french for\u003cspan\u003e \u003c\/span\u003e\u003cem\u003einput\u003c\/em\u003e, is a Component to RGB colorspace converter and Luma Processor with the following features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDecodes SD\/HD Component (YPbPr) to 1V RGBY outputs.\u003c\/li\u003e\n\u003cli\u003eY signal is normalized to the processor input which features an attenuverter (contrast) and offset (brightness), plugging a jack in the processor input will break the normalization to allow the processing of another signal.\u003c\/li\u003e\n\u003cli\u003eY pass-through RCA at the rear of the module to sync the sync generator\/encoder to the external video signal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInputs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0-700mV Y, Pb, Pr, 75ohm\u003c\/li\u003e\n\u003cli\u003e0-1V Processor In, 100kohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOutputs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0-1V R, G, B, Y, Processor Out, 75 ohm\u003c\/li\u003e\n\u003cli\u003e0-700mV Sync Out (rear), 75 ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 8HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 45mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 90\u003c\/span\u003e\u003cspan\u003emA@ +12V \/ 0\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":41733255561310,"sku":"55561310","price":425.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/Syntonie_Entree.jpg?v=1747941544"},{"product_id":"syntonie-solaire-full-wave-rectifier-2-1-mixer","title":"Syntonie Solaire","description":"\u003cp\u003eSolaire, french for\u003cspan\u003e \u003c\/span\u003e\u003cem\u003esolar\u003c\/em\u003e, is a quad full wave rectifier and triple 2:1 mixer with normalisation between rectifier stages and mixers.\u003c\/p\u003e\n\u003cp\u003eThe full wave rectifier is a really useful circuit, it can be used to convert a ramp\/saw wave into a triangle, a triangle wave into a triangle wave twice the frequency of the input, and using it on more complex signals will allow for solarization type of effect as the signal folds on itself, creating kind of metallic shades.\u003c\/p\u003e\n\u003cp\u003eThe 2:1 mixer is also useful to combine two signals together, most obvious use would be H and V oscillators\/ramps combination to produce 2D shapes or summing a signal with a slower signal like an LFO to modulate the offset. Each mixer features a switch to choose between:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAVG (average): signal A and signal B are added and the result divided by two ((A+B)\/2).\u003c\/li\u003e\n\u003cli\u003eADD (addition): signal A and signal B are added (A+B).\u003c\/li\u003e\n\u003cli\u003eSUB (subtract): signal A and signal B are subtracted (A-B).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach rectifiers and mixers can be used individually, but are also normalized to each other as follow:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRectifier 1 OUT -\u0026gt; Mixer 1 IN A\u003c\/li\u003e\n\u003cli\u003eMixer 1 OUT -\u0026gt; Rectifier 2 IN\u003c\/li\u003e\n\u003cli\u003eRectifier 2 OUT -\u0026gt; Mixer 2 IN A\u003c\/li\u003e\n\u003cli\u003eMixer 2 OUT -\u0026gt; Rectifier 3 IN\u003c\/li\u003e\n\u003cli\u003eRectifier 3 OUT -\u0026gt; Mixer 3 IN A\u003c\/li\u003e\n\u003cli\u003eMixer 3 OUT -\u0026gt; Rectifier 4 IN\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis allows to use the mixers input B (IN B) to add a signal in-between each rectification stage, either for slow modulation or to create more complex shapes and shades.\u003c\/p\u003e\n\u003cp\u003eThe module is powered through standard Eurorack connector or DC barrel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003eInputs: 0-1V RECTIFIER IN, 100kohm \/ 0-1V MIX IN A\/B, 100kohm\u003c\/li\u003e\n\u003cli\u003eOutputs: 0-1V RECTIFIER OUT, 75 ohm \/ 0-1V MIX OUT, 75 ohm\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 8HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 42mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 100\u003c\/span\u003e\u003cspan\u003emA@ +12V \/ 0\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":41733308973150,"sku":"08973150","price":435.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/Syntonie_Solaire.jpg?v=1747942868"},{"product_id":"syntonie-seuils","title":"Syntonie Seuils","description":"\u003cp\u003eSeuils, french word for\u003cspan\u003e \u003c\/span\u003e\u003cem\u003ethresholds\u003c\/em\u003e, is a module based around a saw animator circuit, with exposed comparator output and boolean logic.\u003c\/p\u003e\n\u003cp\u003eIt's first intent is to phase shift ramp\/saw signals, however, using it with other periodic waveforms (triangle, sine) or more complex signals offers some interesting waveshaping.\u003c\/p\u003e\n\u003cp\u003eThe input signal goes through a high speed comparator (hard key generator), which will generate a pulse wave. The SHIFT knob and CV will determine the length of this pulse. The resulting signal is available at the front panel LOGIC output.\u003cbr\u003eThe pulse is also used to offset part of the input signal, effectively phase shifting a ramp\/saw, with the SHIFT knob and CV determining the shift amount. The resulting signal is available on the front panel SHIFT output.\u003c\/p\u003e\n\u003cp\u003eEach channel features the same core circuit when the logic switch is set to COMP (comparator), though each one can be set to produce different boolean logic combinations:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003eChannel A features AND gates: when the logic switch is in A\u0026amp;B position, Channel A and Channel B comparator outputs are ANDed together, the resulting signal can then be ANDed again with Channel C when the switch is in (A\u0026amp;B)\u0026amp;C position.\u003c\/li\u003e\n\u003cli\u003eChannel B features OR gates: when the logic switch is in A|B position, Channel A and Channel B comparator outputs are ORed together, the resulting signal can then be ORed again with Channel C when the switch is in (A|B)|C position.\u003c\/li\u003e\n\u003cli\u003eChannel C features XOR gates: when the logic switch is in A^B position, Channel A and Channel B comparator outputs are XORed together, the resulting signal can then be XORed again with Channel C when the switch is in (A^B)^C position.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThose combinations are available at the LOGIC output, but are also used to shift the input signal, thus affecting the SHIFT output too.\u003c\/p\u003e\n\u003cp\u003eThree jumpers at the back of the module allows to modify the boundaries of the threshold for each channel individually, from 0V\/+1V to -0.5V\/+1.5V, this way, if the input signal is exceeding 0V\/+1V, the threshold can be extended in order to sweep accross the whole range of the input signal. Here are the basic uses cases:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0V\/+1V range when shifting single ramps, as extending the threshold to -0.5V\/+1.5V can cause an offset on the shift output that may not be desirable.\u003c\/li\u003e\n\u003cli\u003e-0.5V\/+1.5V when processing more complex signals that may exceed 0V\/+1V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe module is powered through standard Eurorack connector or DC barrel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003eInputs: 0-1V IN, 100kohm \/ 0-1V CV, 100kohm\u003c\/li\u003e\n\u003cli\u003eOutputs: 0-1V LOGIC, 75 ohm \/ 0-1V SHIFT, 75 ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 12HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 42mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 200\u003c\/span\u003e\u003cspan\u003emA@ +12V \/ 0\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":41733359730782,"sku":"59730782","price":589.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/Syntonie_Seuils.jpg?v=1747944506"},{"product_id":"syntonie-rampes","title":"Syntonie Rampes","description":"\u003cp\u003eRampes, french for\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eramps,\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003eis a video ramp generator and sync extractor, supporting the following formats: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003e288p50\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e240p59.94\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e576i50 (PAL)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e480i59.94 (NTSC)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e576p50\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e480p59.94\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e720p50\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e720p59.94\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e720p60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1080i50\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1080i59.94\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1080i60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1080p23.98\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1080p24\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1080p25\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1080p29.97\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1080p30\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe format is detected and selected automatically.\u003c\/p\u003e\n\u003cp\u003eIn video, a ramp is a signal which produces a gradient that goes from minimum to maximum during the line interval (horizontal ramp) or the frame interval (vertical ramp). By mirroring and processing them, it is possible to generate 2D shapes. Rampes also features horizontal, vertical and Odd\/Even sync outputs, which allows to sync other video modules, as well as audio modules.\u003c\/p\u003e\n\u003cp\u003eOn its left side, Rampes features (top to bottom):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003ehorizontal and vertical ramps with their inversions\u003c\/li\u003e\n\u003cli\u003emirrored horizontal and vertical ramps with their inversions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn its right side, Rampes features (top to bottom):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003eHorizontal, vertical and Odd\/Even sync\u003c\/li\u003e\n\u003cli\u003eDiamond, Rectangle, Cross, Star and Ellipse shapes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRampes requires a sync signal over RCA to operate, coming either from a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/syntonie.fr\/products\/vu007b-sync-generator-rgb-encoder\"\u003esync generator module\u003c\/a\u003e, or an external video signal (Composite or Y from Component).\u003cbr\u003eThe module is powered through standard Eurorack connector or DC barrel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003eInputs: RCA Sync input (rear), 75ohm\u003c\/li\u003e\n\u003cli\u003eOutputs: RCA Sync output (rear), 75ohm \/ 0-1V Ramp and shapes outputs, 75ohm \/ 0-5V Sync outputs, 75ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 8HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 45mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 200\u003c\/span\u003e\u003cspan\u003emA@ +12V \/ 0\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":41733477597278,"sku":"77597278","price":547.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/Syntonie_Rampes.jpg?v=1747947222"},{"product_id":"syntonie-isohelie","title":"Syntonie Isohélie","description":"\u003cp\u003eIsohélie is a term used in french versions of graphic editing softwares to describe posterization, it is formed on ancient Greek \"iso\" meaning equal and \"hêlios\" meaning sun\/light.\u003c\/p\u003e\n\u003cp\u003eEach channel is based around a 3-bit ADC\/DAC which will quantize the input signal into 8 equal steps, resulting in 8 different color shades. Processing a full RGB signal with the 3 channels will constrain it to 512 possible colors.\u003c\/p\u003e\n\u003cp\u003eThe bitswap features allows to swap the 3 bits together before they're summed by the R2R DAC, which result in a colorization effect and can be controlled up to video rate.\u003c\/p\u003e\n\u003cp\u003eAll 3 signal inputs and CV inputs are normalized together.\u003c\/p\u003e\n\u003cp\u003ePowered through standard Eurorack connector or DC barrel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003eInputs: 0-1V IN, 499 ohm \/ 0-1V CV, 499 ohm\u003c\/li\u003e\n\u003cli\u003eOutputs: 0-1V Bitswap, 499 ohm \/ 0-1V OUT, 499 ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 12HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 42mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 230\u003c\/span\u003e\u003cspan\u003emA@ +12V \/ 0\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":41733656150110,"sku":"56150110","price":679.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/Syntonie_Isohelie.jpg?v=1747947597"},{"product_id":"syntonie-combines","title":"Syntonie Combines","description":"\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eCombines is a triple analog combiner, aimed at combining two signals in various ways.\u003cbr\u003e\u003cbr\u003eEach of the three channels features:\u003cbr\u003e\u003cbr\u003e- AVG: average of the two inputs, \u003cstrong\u003e(A+B)\/2\u003c\/strong\u003e\u003cbr\u003e- DIFF: difference of the two inputs, \u003cstrong\u003e((A-B)\/2)+0.5)\u003c\/strong\u003e\u003cbr\u003e- MIN: minimum of the two inputs, \u003cstrong\u003emin(A, B)\u003c\/strong\u003e\u003cbr\u003e- MAX: maximum of the two inputs, \u003cstrong\u003emax(A, B)\u003c\/strong\u003e\u003cbr\u003e- XOR: absolute of the difference of the two inputs, \u003cstrong\u003eabs(A-B)\u003cbr\u003e\u003c\/strong\u003e- MIX: mix of three of the above, scaled to 1V, different on each of the three channels\u003cbr\u003eCH1: \u003cstrong\u003e(AVG+DIFF+MIN)\/3\u003cbr\u003e\u003c\/strong\u003eCH2:\u003cstrong\u003e (AVG+MIN+XOR)\/3\u003cbr\u003e\u003c\/strong\u003eCH3: \u003cstrong\u003e(AVG+DIFF+XOR)\/3\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eAs the front panel suggests, Combines can be used to combine a horizontal and vertical triangle signals (like rectified ramps or oscillators), resulting in 2D shapes represented on the outputs. Of course, the inputs are not limited to triangle waves, as any signals can be combined together, creating more complex shapes depending on the inputs.\u003cbr\u003e\u003cbr\u003eIt features 3 channels to allow for RGB processing, however the channels can be chained together as well.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 8HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 42mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 125\u003c\/span\u003e\u003cspan\u003emA@ +12V \/ 0\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":42516992491614,"sku":"92491614","price":409.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/Syntonie_Combines.jpg?v=1772929115"},{"product_id":"syntonie-matrice","title":"Syntonie Matrice","description":"\u003cp\u003eMatrice is a 1x3 matrix mixer with its outputs normalized to 3 VCA.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMatrix section:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe matrix section allows to mix any of the signals present at the inputs 1, 2 and 3 to any of the outputs A, B and C, with a dedicated attenuator for each input\/output pairs. The attenuators have a gain of 1 in maximum position. \u003c\/p\u003e\n\u003cp\u003eIn addition to the attenuators, it is also possible to invert the signals using the invert switches, either before the matrix (PRE) or after the matrix (POST). \u003c\/p\u003e\n\u003cp\u003eUsed in a RGB processing context, just before the RGB encoder, Matrice allows to reach a great variety of color palettes, especially when using matte\/keyed shapes or posterizing.\u003c\/p\u003e\n\u003cp\u003eIt is also possible to use the matrix to mix and invert signals before further processing,  in that case, the luma content will be affected rather than the overall color palette. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVCA section:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe VCA section allows to control the amplitude of the signals  (ie: contrast) at the outputs of the matrix mixer: either manually with the knobs or through control voltages. \u003c\/p\u003e\n\u003cp\u003eWhen no signal is present at the VCA CV inputs, the VCA knobs acts as attenuator, going from black to max value. Once an external signal is plugged into the CV inputs, the VCA knobs now acts as attenuverter for the CV. \u003c\/p\u003e\n\u003cp\u003eThe VCA essentially works as a fade to black, allowing to tame the colors, which is especially useful after the matrix, since it can outputs signals up to 3V, as well as inverting them, that can result in a really bright composition.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNormalization:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe matrix inputs are normalized together, so any signal plugged into input 1 will be routed to input 2, until a signal is plugged into input 2. Similarly, the signal present at input 2 will be routed to input 3, until a signal is plugged into input 3. This is handy to colorize a single monochrome source in a RGB context.\u003c\/p\u003e\n\u003cp\u003eThe outputs of the matrix section are normalized to the VCA inputs to cover the previously mentioned workflow. However, plugging  a signal into the VCA inputs will break the normalization from the matrix section, so both sections can be used independently.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 16HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 42mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 310\u003c\/span\u003e\u003cspan\u003emA@ +12V \/ 0\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":42517013725278,"sku":"13725278","price":625.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/Syntonie_Matrice.jpg?v=1772929442"},{"product_id":"syntonie-sortie","title":"Syntonie Sortie","description":"\u003cp\u003eSortie (french for output) is a RGB to Composite\/S-video\/Component encoder and sync generator supporting SD and HD.\u003c\/p\u003e\n\u003cp\u003eThe internal standard is selected by the mean of a push button, with a dedicated LED indicator for each standard.\u003cbr\u003eWhen an external video signal is present at the sync input of the module, the standard will be selected automatically and the external sync LED indicator will light up.\u003c\/p\u003e\n\u003cp\u003eRCA sync I\/O at the rear of the module.\u003cbr\u003e\u003cbr\u003eSupports the following standards:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e576i50 (PAL)\u003c\/li\u003e\n\u003cli\u003e480i59.94 (NTSC)\u003c\/li\u003e\n\u003cli\u003e576p50\u003c\/li\u003e\n\u003cli\u003e480p59.94\u003c\/li\u003e\n\u003cli\u003e720p50\u003c\/li\u003e\n\u003cli\u003e720p59.94\u003c\/li\u003e\n\u003cli\u003e720p60\u003c\/li\u003e\n\u003cli\u003e1080i50\u003c\/li\u003e\n\u003cli\u003e1080i59.94\u003c\/li\u003e\n\u003cli\u003e1080i60\u003c\/li\u003e\n\u003cli\u003e1080p23.98\u003c\/li\u003e\n\u003cli\u003e1080p24\u003c\/li\u003e\n\u003cli\u003e1080p25\u003c\/li\u003e\n\u003cli\u003e1080p29.97\u003c\/li\u003e\n\u003cli\u003e1080p30\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInputs:\u003cbr\u003e\u003cbr\u003e- 0-1V RGB, 100k ohm, jack\u003cbr\u003e- 0-700mV Sync in, 75 ohm, RCA (rear)\u003c\/p\u003e\n\u003cp\u003eOutputs:\u003cbr\u003e\u003cbr\u003e- 0-700mV YPbPr\/CVBS, 75 ohm, RCA\u003cbr\u003e- 0-700mV S-Video, 75 ohm, Mini Din-4\u003cbr\u003e- 0-700mV Sync out, 75 ohm, RCA (rear)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCan be powered through standard Eurorack 16pin connector or DC barrel connector.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 8HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 42mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 130\u003c\/span\u003e\u003cspan\u003emA@ +12V \/ 0\u003c\/span\u003e\u003cspan\u003emA @ -12V\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":42517142175838,"sku":"42175838","price":565.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/SyntonieSortie.jpg?v=1772931573"},{"product_id":"syntonie-rca-cable-15cm","title":"Syntonie RCA Cable - Right angle\/right angle - 15cm \/ 6 inches","description":"\u003cp\u003eRCA cables for sync connection between modules.\u003c\/p\u003e\n\u003cp\u003eCables comes in two configurations:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRight angle plug to right angle plug, perfect to connect two modules that has vertical RCA sockets\u003c\/li\u003e\n\u003cli\u003eRight angle plug to straight plug, ideal to connect one module with right angle RCA socket to a module with vertical RCA socket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach configurations is available in 3 sizes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15cm \/ 6 inches\u003c\/li\u003e\n\u003cli\u003e30cm \/ 12 inches\u003c\/li\u003e\n\u003cli\u003e60cm \/ 24 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfiguration\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003clabel for=\"template--19759277113609__main-1-0\"\u003eRight angle\/right angle\u003c\/label\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003clabel for=\"template--19759277113609__main-1-1\"\u003eRight angle\/straight\u003c\/label\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":42690179039326,"sku":"79039326","price":7.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/RCA.jpg?v=1776991921"},{"product_id":"syntonie-rca-cable-right-angle-right-angle-30cm-12-inches","title":"Syntonie RCA Cable - Right angle\/right angle - 30cm \/ 12 inches","description":"\u003cp\u003eRCA cables for sync connection between modules.\u003c\/p\u003e\n\u003cp\u003eCables comes in two configurations:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRight angle plug to right angle plug, perfect to connect two modules that has vertical RCA sockets\u003c\/li\u003e\n\u003cli\u003eRight angle plug to straight plug, ideal to connect one module with right angle RCA socket to a module with vertical RCA socket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach configurations is available in 3 sizes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15cm \/ 6 inches\u003c\/li\u003e\n\u003cli\u003e30cm \/ 12 inches\u003c\/li\u003e\n\u003cli\u003e60cm \/ 24 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfiguration\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003clabel for=\"template--19759277113609__main-1-0\"\u003eRight angle\/right angle\u003c\/label\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003clabel for=\"template--19759277113609__main-1-1\"\u003eRight angle\/straight\u003c\/label\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":42690198175838,"sku":"98175838","price":7.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/RCA.jpg?v=1776991921"},{"product_id":"syntonie-rca-cable-right-angle-right-angle-60cm-24-inches","title":"Syntonie RCA Cable - Right angle\/right angle - 60cm \/ 24 inches","description":"\u003cp\u003eRCA cables for sync connection between modules.\u003c\/p\u003e\n\u003cp\u003eCables comes in two configurations:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRight angle plug to right angle plug, perfect to connect two modules that has vertical RCA sockets\u003c\/li\u003e\n\u003cli\u003eRight angle plug to straight plug, ideal to connect one module with right angle RCA socket to a module with vertical RCA socket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach configurations is available in 3 sizes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15cm \/ 6 inches\u003c\/li\u003e\n\u003cli\u003e30cm \/ 12 inches\u003c\/li\u003e\n\u003cli\u003e60cm \/ 24 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfiguration\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003clabel for=\"template--19759277113609__main-1-0\"\u003eRight angle\/right angle\u003c\/label\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003clabel for=\"template--19759277113609__main-1-1\"\u003eRight angle\/straight\u003c\/label\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":42690198929502,"sku":"98929502","price":8.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/RCA.jpg?v=1776991921"},{"product_id":"syntonie-rca-cable-right-angle-straight-60cm-24-inches-copy","title":"Syntonie RCA Cable - Right angle\/straight - 60cm \/ 24 inches","description":"\u003cp\u003eRCA cables for sync connection between modules.\u003c\/p\u003e\n\u003cp\u003eCables comes in two configurations:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRight angle plug to right angle plug, perfect to connect two modules that has vertical RCA sockets\u003c\/li\u003e\n\u003cli\u003eRight angle plug to straight plug, ideal to connect one module with right angle RCA socket to a module with vertical RCA socket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach configurations is available in 3 sizes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15cm \/ 6 inches\u003c\/li\u003e\n\u003cli\u003e30cm \/ 12 inches\u003c\/li\u003e\n\u003cli\u003e60cm \/ 24 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfiguration\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003clabel for=\"template--19759277113609__main-1-0\"\u003eRight angle\/right angle\u003c\/label\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003clabel for=\"template--19759277113609__main-1-1\"\u003eRight angle\/straight\u003c\/label\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":42690199847006,"sku":"99847006","price":8.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/SYMTONIE_RCAstraight.jpg?v=1778370372"},{"product_id":"syntonie-rca-cable-right-angle-straight-30cm-12-inches","title":"Syntonie RCA Cable - Right angle\/straight - 30cm \/ 12 inches","description":"\u003cp\u003eRCA cables for sync connection between modules.\u003c\/p\u003e\n\u003cp\u003eCables comes in two configurations:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRight angle plug to right angle plug, perfect to connect two modules that has vertical RCA sockets\u003c\/li\u003e\n\u003cli\u003eRight angle plug to straight plug, ideal to connect one module with right angle RCA socket to a module with vertical RCA socket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach configurations is available in 3 sizes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15cm \/ 6 inches\u003c\/li\u003e\n\u003cli\u003e30cm \/ 12 inches\u003c\/li\u003e\n\u003cli\u003e60cm \/ 24 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfiguration\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003clabel for=\"template--19759277113609__main-1-0\"\u003eRight angle\/right angle\u003c\/label\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003clabel for=\"template--19759277113609__main-1-1\"\u003eRight angle\/straight\u003c\/label\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":42690200535134,"sku":"00535134","price":7.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/SYMTONIE_RCAstraight.jpg?v=1778370372"},{"product_id":"syntonie-rca-cable-right-angle-straight-15cm-6-inches","title":"Syntonie RCA Cable - Right angle\/straight - 15cm \/ 6 inches","description":"\u003cp\u003eRCA cables for sync connection between modules.\u003c\/p\u003e\n\u003cp\u003eCables comes in two configurations:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRight angle plug to right angle plug, perfect to connect two modules that has vertical RCA sockets\u003c\/li\u003e\n\u003cli\u003eRight angle plug to straight plug, ideal to connect one module with right angle RCA socket to a module with vertical RCA socket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach configurations is available in 3 sizes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15cm \/ 6 inches\u003c\/li\u003e\n\u003cli\u003e30cm \/ 12 inches\u003c\/li\u003e\n\u003cli\u003e60cm \/ 24 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfiguration\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003clabel for=\"template--19759277113609__main-1-0\"\u003eRight angle\/right angle\u003c\/label\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003clabel for=\"template--19759277113609__main-1-1\"\u003eRight angle\/straight\u003c\/label\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syntonie","offers":[{"title":"Default Title","offer_id":42690201583710,"sku":"01583710","price":7.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/SYMTONIE_RCAstraight.jpg?v=1778370372"}],"url":"https:\/\/nightlife-electronics.com\/collections\/syntonie.oembed?page=2","provider":"Nightlife Electronics","version":"1.0","type":"link"}