{"title":"Doepfer","description":"","products":[{"product_id":"doepfer-mcv4","title":"Doepfer MCV4","description":"\u003cp\u003eMCV4 is a low-cost MIDI-to-CV interface that allows monophonic synthesizers to be controlled via MIDI.\u003c\/p\u003e\n\u003cp class=\"prod\"\u003eThis interface converts MIDI information into 4 control voltages and one gate. It has an external plug-in power supply. It is important that the first control voltage and the gate are always set to MIDI note events, with the pitch bender being converted to the first CV. The remaining CVs can be used to control further parameters of an older synthesizer in the sequencer, e.g. filter modulations. The 3 control voltages can be controlled via MIDI controllers. The interface receives an adjustable MIDI channel, which means that looping the MIDI signal makes sense.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 95mm x 75mm x 35mm\u003c\/li\u003e\n\u003cli\u003ePower connection: 100 mA @ \u003cmeta charset=\"utf-8\"\u003e7-12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":29011901055028,"sku":"01055028","price":199.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/doepfer_MCV4_midi_to_cv_4c6448d4-bf2e-4823-8145-41936469da2f.jpg?v=1564521001"},{"product_id":"doepfer-a-135-2-quad-vca-mixer","title":"Doepfer A-135-2 Quad VCA \/ Mixer","description":"\u003cp\u003e\u003cspan\u003eA-135-2 is a miniature version of the \u003c\/span\u003e\u003ca href=\"https:\/\/nightlife-electronics.com\/products\/doepfer-a-135-2-quad-vca-mixer\"\u003eA-135-1\u003c\/a\u003e quad voltage controlled mixer\u003cspan\u003e. Behind a front panel with 8 HP only four linear VCAs (voltage controlled amplifiers) and a voltage controlled mixer based on the VCAs are available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul style=\"font-weight: 400;\"\u003e\n\u003cli\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli\u003eDepth: 40mm\u003c\/li\u003e\n\u003cli\u003ePower: 40mA @ +12 \/ 40mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":32048888643678,"sku":"88643678","price":241.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-135-2QuadVCAMixer.jpg?v=1593902920"},{"product_id":"doepfer-a-111-6v-mini-synth-voice-vintage","title":"Doepfer A-111-6V Mini Synth Voice Vintage","description":"\u003cp\u003e\u003cspan\u003eModule A-111-6 is a complete miniature monophonic synthesizer module.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 10HP\u003c\/li\u003e\n\u003cli\u003eDepth: 50mm\u003c\/li\u003e\n\u003cli\u003ePower: 60mA @ +12V \/ 50mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":32048897785950,"sku":"97785950","price":385.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-111-6VVintageMiniSynthVoiceBlack.jpg?v=1593904831"},{"product_id":"doepfer-a-140-2v-dual-mini-adsr-vintage","title":"Doepfer A-140-2V Dual Mini ADSR Vintage","description":"\u003cp\u003e\u003cspan\u003eThe module contains two ADSR type voltage controlled envelope generators with exponential curve shapes (charge\/discharge curves of a capacitor).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli\u003eDepth: 40mm\u003c\/li\u003e\n\u003cli\u003ePower: 50mA @ +12V \/ 40mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":32048900145246,"sku":"00145246","price":298.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-140-2VVintageDualADSRBlack.jpg?v=1593906391"},{"product_id":"doepfer-a-199v-spring-reverb-vintage","title":"Doepfer A-199V Spring Reverb - Vintage","description":"\u003cp\u003e\u003cspan\u003eModule A-199 is a spring reverb module. The reverb effect is electronically simulated by means of  3 spiral springs. Spring reverb systems have a very characteristic sound that is based on the (insufficient) mechanical properties of the springs like signal delays, audio resonances, limited frequency range, acoustic feedback behaviour, sensitivity to mechanical shocks and others.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe 3-spring system used in the A-199 ensures a \"dense\" reverb because of the different properties of the three springs.\u003cspan size=\"2\" face=\"Arial\" style=\"font-family: Arial; font-size: small;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli\u003eDepth: 50mm\u003c\/li\u003e\n\u003cli\u003ePower: 80mA @ +12V \/ 10mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":32048910958686,"sku":"10958686","price":235.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-199VSpringReverbVintage.jpg?v=1593907230"},{"product_id":"doepfer-a-121-3-multimode-vcf-slim-line","title":"Doepfer A-121-3 Multimode VCF - Slim Line","description":"\u003cp\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" face=\"Arial\" size=\"2\"\u003eModule A-121-3 is functionally nearly identical to module\u003cspan\u003e \u003c\/span\u003eA-121-2. Only the distances between the controls and sockets are smaller and rubberized, small rotary knobs are used. Therefore the front panel width is only 4HP compared to 8HP of the A-121-2. In the first place it is planned for applications where only limited space is available.\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" face=\"Arial\" size=\"2\"\u003eThe only functional difference compared to the A-121-2 is the missing attenuator for the resonance CV input CQ.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 4HP\u003c\/li\u003e\n\u003cli\u003eDepth: 50mm\u003c\/li\u003e\n\u003cli\u003ePower: 40mA @ +12V \/ 30mA @ -12V\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":32049208000606,"sku":"08000606","price":175.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-121-3MultimodeVCFSlimLine.jpg?v=1593920416"},{"product_id":"doepfer-a-101-2-vactrol-low-pass-gate","title":"Doepfer A-101-2 Vactrol Low Pass Gate","description":"\u003cp\u003eA-101-2 is a vactrol based combination of Low Pass filter (LP) and VCA and was inspired by the Buchla module 292. The term \"Low Pass Gate\" was created by Don Buchla and stands for a module that can be switched between low pass and VCA. The control (manually and via external CV) is responsible for frequency in the low pass mode and for loudness in the VCA mode. Additionally a combined mode LP+VCA is available. In this mode the sound becomes more dull as the loudness decreases.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIn contrast to the Buchla design the A-101-2 offers attenuators for both CV and audio input, a manual \u003c\/span\u003e\u003cu\u003eresonance\u003c\/u\u003e\u003cspan\u003e control and two gate inputs to control the function of the module in addition to the manual toggle switch.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIn principle the A-101-2 is a 12 dB low pass filter that can be switched to VCA or a combination of Low Pass and VCA. The controlling elements for frequency (LP mode) resp. amplitude (VCA mode) are so-called vactrols. Vactrols are known for their smooth sound behaviour. For more general details about vactrols please look at the \u003c\/span\u003e\u003ca href=\"http:\/\/www.doepfer.de\/a100_man\/Vactrol.htm\"\u003eVactrol Basics page\u003c\/a\u003e\u003cspan\u003e. Because of the vactrol circuit the audio signal is not fully attenuated in the VCA mode at the minimum setting of the F\/A control.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Frequency (in the LP mode) resp. the Amplitude (in the VCA mode) is controlled manually (F\/A) and by the 2 control inputs CV1 (without attenuator) and CV2 (with attenuator).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe audio input is equipped with an attenuator to enable distortion too (above ~\u003c\/span\u003e\u003csup\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/sup\u003e\u003cspan\u003eposition 5 distortion is obtained with standard A-100 audio levels, e.g. VCO).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cu\u003eresonance\u003c\/u\u003e\u003cspan\u003e function \"colors\" to the sound and is adjustable all the way up to self-oscillation. Resonance and consequently self-oscillation may vary with the filter frequency because of vactrol tolerances. Due to the circuit the resonance has a little bit an influence on the audio level (increasing resonance = increasing audio level). To obtain the original Buchla sound the resonance control simply has to be set fully counterclockwise.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe function of the module is controlled by a manual switch. The left and right positions of the switch correspond to LP resp. VCA mode. In the middle position one obtains the combination of Low Pass and VCA. In this position it is also possible to control the function of the module by the two Gate inputs G1 and G2. The table printed at the front panel shows the connection between the gate levels (L = low, H = high) and the module function.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli\u003eDepth: 50mm\u003c\/li\u003e\n\u003cli\u003ePower: 20mA @ +12 \/ 20mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":32049260363870,"sku":"60363870","price":168.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-101-2VactrolLowPassGate.jpg?v=1593921420"},{"product_id":"doepfer-a-105-4-quad-poly-ssi-vcf","title":"Doepfer A-105-4 Quad Poly SSI VCF","description":"\u003cp\u003e\u003cspan\u003eA-105-4 is our first polyphonic filter and contains four identical 24dB Lowpass filters (SSM2044\/SSI2144 type). It has available common manual controls and CV inputs with attenuators for all parameters.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cspan\u003eEach filter has available a separate FM input as well as an Audio Input and Audio Output. The FM inputs are typically connected to the outputs of the associated envelope generator (e.g. A-141-4). The envelope amount for all four filters is controlled by the FM knob and the CVFM input by means of four built-in VCAs, which are controlled by the FM control and CVFM input. This allows also voltage control of the envelope amounts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cspan\u003eIn addition common frequency modulation for all filters is possible (e.g. by an LFO). For this the CVF input with attenuator can be used.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cspan\u003eThe range of the audio input level control (L) allows also clipping\/distortion with typical A-100 audio levels (e.g. from \u003ca href=\"http:\/\/www.doepfer.de\/A1114.htm\"\u003eA-111-4\u003c\/a\u003e) at the filter inputs. Even this parameter is voltage controllable as well as the resonance (Q).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eApplication: polyphonic patches (four VCFs with same parameters) or other structures where 2 or more simultaneously controllable filters are required (e.g. stereophonic oder quadrophonic applications)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli\u003eDepth: 50mm\u003c\/li\u003e\n\u003cli\u003ePower: 70mA @ +12 \/ 70mA @ -12V\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":32049266622558,"sku":"66622558","price":355.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-105-4QuadPolySSIVCF.jpg?v=1593921728"},{"product_id":"doepfer-a-138i-interrupting-mixer-slim-line","title":"Doepfer A-138i Interrupting Mixer - Slim Line","description":"\u003cp\u003e\u003cspan size=\"2\" face=\"Arial\" style=\"font-family: Arial; font-size: small;\"\u003eModule A-138i is a four channel mixer with an additional mute switch for each input. On top of that it is equipped with two types of single outputs and a dual mix output. \u003c\/span\u003e\u003cspan size=\"2\" face=\"Arial\" style=\"font-family: Arial; font-size: small;\"\u003e\u003cspan\u003e \u003c\/span\u003eAll inputs and outputs are DC coupled. Consequently the VCAs can be used to mix both audio and control voltages.\u003cbr\u003eEach input is  - apart from the mute switch - equipped with a linear attenuator. The amplification range is 0....1.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan size=\"2\" face=\"Arial\" style=\"font-family: Arial; font-size: small;\"\u003eThe single outputs offer the attenuated and possibly muted signal of the channel in question. Two version of single outputs are available:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan size=\"2\" face=\"Arial\" style=\"font-family: Arial; font-size: small;\"\u003e\u003cb\u003eSingle Output A\u003c\/b\u003e: If a plug is inserted into the single output \"A\" socket the channel in question is removed from the sum signal.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan size=\"2\" face=\"Arial\" style=\"font-family: Arial; font-size: small;\"\u003e\u003cb\u003eSingle Output B\u003c\/b\u003e: If a plug is inserted into the single output \"B\" socket the channel in question is\u003cspan\u003e \u003c\/span\u003e\u003cu\u003enot\u003c\/u\u003e\u003cspan\u003e \u003c\/span\u003eremoved from the sum signal. This type of single outputs is available only for the channels 1 and 2.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan size=\"2\" face=\"Arial\" style=\"font-family: Arial; font-size: small;\"\u003eThe output is twice available (two sockets, hard-wired like a multiple).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003eThe distances between the controls and sockets are smaller as for the standard A-100 modules and rubberized small-sized knobs are used. In return the front panel has 6 HP width only. The module is primarily planned for applications where only limited space is available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 6HP\u003c\/li\u003e\n\u003cli\u003eDepth: 40mm\u003c\/li\u003e\n\u003cli\u003ePower: 10mA @ +12V \/ 10mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":32053929967710,"sku":"29967710","price":175.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-138iInterruptingMixer-SlimLine.jpg?v=1594077562"},{"product_id":"doepfer-a-106-5-12db-sem-vcf","title":"Doepfer A-106-5 12dB SEM VCF","description":"\u003cp\u003e\u003cspan style=\"font-family: Arial; font-size: small;\"\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003eModule A-106-5 is a\u003cspan\u003e \u003c\/span\u003e12dB multimode filter\u003cspan\u003e \u003c\/span\u003ethat is based on the filter circuit of the Oberheim SEM module.The filter is equipped with a band pass output and a combined low\/notch\/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates. The module does not feature self oscillation in contrast to most of the other filters of the A-100 system. The module generates a distorted audio signal if the level control is set to about 50% (i.e. center position) or more with A-100 standard signals like VCOs.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003eInputs: Audio In, CV1 In without attenuator, CV2 In with Polarizer\u003cbr\u003eOutputs: Bandpass Out, Low\/Highpass Mix-Out\u003cbr\u003eControls: Audio Attenuator, CV2 Polarizer, Frequency, Resonance, LP\/HP Mix\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003eThe function and operation of this module is very similar to the Wasp filter module\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.doepfer.de\/a124.htm\"\u003eA-124\u003c\/a\u003e. But the sound of both filters is very different ! We will publish no separate user's manual for the A-106-5 but a combined manual for both A-106-5 and A-124. The only functional difference is the position of the sockets and controls, and the function of the controls CV2 (A-124: normal attenuator, A-106-5: polarizer)\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli\u003eDepth: 55mm\u003c\/li\u003e\n\u003cli\u003ePower: 30mA @ +12 \/ 20mA @ -12V\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":32053933506654,"sku":"33506654","price":155.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-106-512dBSEMVCF.jpg?v=1594078164"},{"product_id":"doepfer-a-124se-vcf5-wasp-filter-special-edition","title":"Doepfer A-124SE VCF5 Wasp Filter - Special Edition","description":"\u003cp\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003eModule A-124 is a\u003cspan\u003e \u003c\/span\u003especial 12dB multimode filter\u003cspan\u003e \u003c\/span\u003eusing the \"strange\" filter circuit of the \"\u003cem\u003e\u003cu\u003eEDP Wasp\u003c\/u\u003e\u003c\/em\u003e\" (an analog synthesizer with black\/yellow case built end of the seventies, manufactured by the UK company \"Electronic Dream Plant\" with Chris Huggett und Adrian Wagner). This design \"abuses\" digital inverters as analog operational amplifiers leading to distortions and other \"dirty\" effects that generate the specific sound of this filter. The filter is equipped with a band pass output and a combined low\/notch\/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates. The module does not feature self oscillation in contrast to most of the other filters of the A-100 system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003eThe function and operation of this module is very similar to the module SEM VCF\u003cspan\u003e \u003c\/span\u003eA-106-5. But the sound of both filters is very different ! The only functional difference is the position of the sockets and controls, and the function of the controls CV2 (A-124: normal attenuator, A-106-5: polarizer).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli\u003eDepth: 40mm\u003c\/li\u003e\n\u003cli\u003ePower: 10mA @ +12V \/ 10mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":32053950906462,"sku":"50906462","price":159.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-124SEVCF5WaspFilterSpecialEdition.jpg?v=1594079454"},{"product_id":"doepfer-a-124se-vcf5-wasp-filter","title":"Doepfer A-124 VCF5 Wasp Filter","description":"\u003cp\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003eModule A-124 is a\u003cspan\u003e \u003c\/span\u003especial 12dB multimode filter\u003cspan\u003e \u003c\/span\u003eusing the \"strange\" filter circuit of the \"\u003cem\u003e\u003cu\u003eEDP Wasp\u003c\/u\u003e\u003c\/em\u003e\" (an analog synthesizer with black\/yellow case built end of the seventies, manufactured by the UK company \"Electronic Dream Plant\" with Chris Huggett und Adrian Wagner). This design \"abuses\" digital inverters as analog operational amplifiers leading to distortions and other \"dirty\" effects that generate the specific sound of this filter. The filter is equipped with a band pass output and a combined low\/notch\/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates. The module does not feature self oscillation in contrast to most of the other filters of the A-100 system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003eInputs: Audio In, CV In (2x)\u003cbr\u003eOutputs: Bandpass Out, Low\/Highpass Mix-Out\u003cbr\u003eControls: Audio and CV attenuator, Frequency, Resonance, LP\/HP Mix\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003eThe function and operation of this module is very similar to the module SEM VCF\u003cspan\u003e \u003c\/span\u003eA-106-5. But the sound of both filters is very different ! The only functional difference is the position of the sockets and controls, and the function of the controls CV2 (A-124: normal attenuator, A-106-5: polarizer).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli\u003eDepth: 40mm\u003c\/li\u003e\n\u003cli\u003ePower: 10mA @ +12V \/ 10mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":32053959426142,"sku":"59426142","price":153.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-124VCF5WaspFilter.jpg?v=1594079971"},{"product_id":"doepfer-a-130-2-dual-lin-exp-vca-slim-line","title":"Doepfer A-130-2 Dual Lin\/Exp VCA - Slim Line","description":"\u003cp\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" size=\"2\" face=\"Arial\"\u003eModule A-130-2 is the slim version of module\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" size=\"2\" face=\"Arial\"\u003e\u003ca href=\"https:\/\/nightlife-electronics.com\/collections\/doepfer\/products\/doepfer-a-135-2-quad-vca-mixer\"\u003eA-132-3\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand offers essentially the same features. But the distances between the controls are smaller and rubberized small-sized knobs are used. In return the front panel has 4 HP only which is half the width of the\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" size=\"2\" face=\"Arial\"\u003e\u003ca href=\"https:\/\/nightlife-electronics.com\/collections\/doepfer\/products\/doepfer-a-135-2-quad-vca-mixer\"\u003eA-132-3\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" size=\"2\" face=\"Arial\"\u003e. The module is primarily planned for applications where only limited space is available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" face=\"Arial\" size=\"2\"\u003eThe module is composed of two identical voltage controlled amplifiers (VCA). Each VCA has a manual gain control (also named Initial Gain) and a control voltage input with attenuator. The character of the control scale can be switched to linear or exponential. All inputs and outputs are DC coupled. Consequently the VCAs can be used to process both audio and control voltages (e.g. for voltage control of the level of LFO or envelope signals). The signal input has no attenuator available but is capable to process up to 16Vpp signals (i.e. -8V...+8V) without distortion. For the processing of higher levels an external attenuator (e.g.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.doepfer.de\/a1831.htm\"\u003eA-183-1\u003c\/a\u003e) is recommended. The amplification range is 0...1. Even with a higher external control voltage the amplification remains at 1 (kind of \"amplification clipping\" at 1). \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 4HP\u003c\/li\u003e\n\u003cli\u003eDepth: 45mm\u003c\/li\u003e\n\u003cli\u003ePower: 30mA @ +12V \/ 30mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":32144176513118,"sku":"76513118","price":155.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-130-2DualLinExpVCASlimLine.jpg?v=1598342173"},{"product_id":"doepfer-a-182-1-switched-multiples","title":"Doepfer A-182-1 Switched Multiples","description":"\u003cp\u003e\u003cspan size=\"2\" face=\"Arial\" style=\"font-family: Arial; font-size: small;\" data-mce-style=\"font-family: Arial; font-size: small;\"\u003eModule A-182-1 is a simple passive multi-connector similar to the multiples modules\u003cspan\u003e \u003c\/span\u003eA-180-1\/A-180-2. In contrast to modules A-180-1\/2 each socket is equipped with a 3-position switch that allows to connect the corresponding socket to the internal bus #1 (left position), bus #2 (right position) or to turn the socket off (center position).\u003c\/span\u003e\u003cspan size=\"2\" face=\"Arial\" style=\"font-family: Arial; font-size: small;\" data-mce-style=\"font-family: Arial; font-size: small;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" data-mce-style=\"font-family: Arial; font-size: small;\"\u003eExamples:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli data-mce-style=\"padding-left: 40px;\"\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" data-mce-style=\"font-family: Arial; font-size: small;\"\u003eall switches in left position or all switches in right position: 8-fold multiple\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-style=\"padding-left: 40px;\"\u003e\n\u003cspan style=\"font-family: Arial; font-size: small;\" data-mce-style=\"font-family: Arial; font-size: small;\"\u003e\u003c\/span\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" data-mce-style=\"font-family: Arial; font-size: small;\"\u003e four switches in left position and four switches in right position: two 4-fold multiple\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-style=\"padding-left: 40px;\"\u003eX switches in left position, Y switches in right position and Z switches in center position: two separate multiples with some sockets turned off\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 6HP\u003c\/li\u003e\n\u003cli\u003eDepth: 30mm\u003c\/li\u003e\n\u003cli\u003ePower: Passive\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":32144194502750,"sku":"94502750","price":125.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-182-1SwitchedMultiples.jpg?v=1598344863"},{"product_id":"doepfer-a-135-3-vc-stereo-mixer","title":"Doepfer A-135-3 VC Stereo Mixer","description":"\u003cp\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" size=\"2\" face=\"Arial\" data-mce-style=\"font-family: Arial; font-size: small;\"\u003e\u003cspan\u003eA-135-3 is a  is a voltage controlled stereo mixer with four inputs. Behind a front panel with 8 HP only eight linear VCAs (voltage controlled amplifiers) and the mixer based on the VCAs are available.\u003c\/span\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" size=\"2\" face=\"Arial\" data-mce-style=\"font-family: Arial; font-size: small;\"\u003e\u003cspan color=\"#000000\"\u003eThe sum of the left and right signals appear at the sockets Out L and Out R. The maximal amplification is  about 0.5 to avoid clipping at the mixer outputs (otherwise the outputs may distort with 15Vpp signals at each signal input and full amplifications). If another maximal amplification (e.g. 1) is required two resistors have to be replaced.\u003c\/span\u003e \u003cbr\u003e\u003cspan color=\"#000000\" face=\"Arial\" size=\"2\"\u003eAll inputs and outputs are DC coupled. Consequently the module can be used to process both audio and control voltages.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli\u003eDepth: 45mm\u003c\/li\u003e\n\u003cli\u003ePower: 40mA @ +12V \/ 40mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":32147649888350,"sku":"49888350","price":245.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-135-3VCStereoMixer.jpg?v=1598562344"},{"product_id":"doepfer-a-138sv-mini-stereo-mixer-vintage","title":"Doepfer A-138SV Mini Stereo Mixer Vintage","description":"\u003cp align=\"left\"\u003e\u003cspan\u003e\u003cspan size=\"2\" face=\"Arial\" style=\"font-family: Arial; font-size: small;\"\u003eA-138s is a simple but useful 4-in-2 mixing tool. It has four inputs available. Each input is equipped with an attenuator (Level) and a panning control (Pan) which is used to distribute the signal to the left and right output. \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan size=\"2\" face=\"Arial\" style=\"font-family: Arial; font-size: small;\"\u003eIn the center position of the Pan control the corresponding signal is distributed with equal levels to the left and right output (OUT L and OUT R). In fully CCW position the signal appears only at the left output (OUT L), fully CW only at the right output (OUT R).\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cspan\u003e\u003cspan size=\"2\" face=\"Arial\" style=\"font-family: Arial; font-size: small;\"\u003eBeyond stereo mixing it is equally suited to create variable parallel routings. For example: Any of the four inputs may be routed in variable intensity to feed two filters.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli\u003eDepth: 30mm\u003c\/li\u003e\n\u003cli\u003ePower: 10mA @ +12V \/ 10mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":32180632059998,"sku":"32059998","price":155.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-138sVMiniStereoMixerVintageEdition.jpg?v=1600391451"},{"product_id":"doepfer-a-174-4v-3d-joystick","title":"Doepfer A-174-4V 3D Joystick","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eModule A-174-4 generates several control voltages and a gate signal controlled by a spring-loaded X\/Y cross potentiometer (so-called joy stick). The control voltages for X and Y are controlled by the X and Y position of the joystick in the usual way. The third control voltage Z is controlled by the rotation of the spring-loaded joystick knob. The gate signal is generated by a button at the center\/top of the joystick knob. As an additional feature four control voltages are generated that are assigned to the quadrants of the Cartesian coordinate system. These quadrant voltages are derived from the X and Y voltages by means of a special algorithm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 12HP\u003c\/li\u003e\n\u003cli\u003eDepth: 50mm\u003c\/li\u003e\n\u003cli\u003ePower: 50mA @ +12V \/ 20mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":32372578025566,"sku":"78025566","price":295.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-174-4V3DJoystick.jpg?v=1612227003"},{"product_id":"doepfer-a-135-2v-quad-vca-mixer-vintage","title":"Doepfer A-135-2V Quad VCA \/ Mixer Vintage","description":"\u003cp\u003e\u003cspan\u003eA-135-2 is a miniature version of the \u003c\/span\u003e\u003ca href=\"https:\/\/nightlife-electronics.com\/products\/doepfer-a-135-2-quad-vca-mixer\"\u003eA-135-1\u003c\/a\u003e quad voltage controlled mixer\u003cspan\u003e. Behind a front panel with 8 HP only four linear VCAs (voltage controlled amplifiers) and a voltage controlled mixer based on the VCAs are available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul style=\"font-weight: 400;\"\u003e\n\u003cli\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli\u003eDepth: 40mm\u003c\/li\u003e\n\u003cli\u003ePower: 40mA @ +12V \/ 40mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39320061149278,"sku":"61149278","price":259.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-135-2VQuadVCAMixer.jpg?v=1619077085"},{"product_id":"doepfer-a-160-2-clock-divider-ii","title":"Doepfer A-160-2 Clock Divider II","description":"\u003cp\u003eModule A-160-2 is an enhanced version of the standard clock divider A-160. The module is a frequency divider for clock\/trigger\/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Clock input will take any digital signal from, eg., an LFO, MIDI sync, or the gate from a MIDI-CV interface. At the outputs, you have access to three sets of seven different sub-divided clock signals, from half the clock frequency down to 1\/128. The low\/high levels of the output signals are 0V and about +10V.\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe A-160-2 also has a reset input. Whenever a reset signal is sensed, all outputs are set to certain levels which depend upon the selected mode. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 4HP\u003c\/li\u003e\n\u003cli\u003eDepth: 35mm\u003c\/li\u003e\n\u003cli\u003ePower: 50mA @ +12V \/ 50mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39375074918494,"sku":"74918494","price":175.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-160-2ClockDivider2.jpg?v=1623282841"},{"product_id":"doepfer-a-151v-quad-sequential-switch-vintage","title":"Doepfer A-151V Quad Sequential Switch Vintage","description":"\u003cdiv\u003e\n\u003cp class=\"p1\"\u003eModule A-151 (Quad Sequential Switch) is like an electronic four-position rotary switch. It includes trigger and reset inputs, four in \/ outputs, and a common out \/ input. Each time a pulse is received at the trigger input socket, the common out \/ input is connected to the next in \/ output. After the fourth in \/ output, the next trigger makes it step back to the first again, and so on. A positive pulse at the reset input switches the out \/ input immediately back to the first in \/ output.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eVoltages in the range -8V...+8V at the O\/I resp. I\/O sockets can be processed by the module. Four LEDs indicate the active in \/ output (ie. the on that is connected to the out \/ input at any particular time).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 4HP\u003c\/li\u003e\n\u003cli\u003eDepth: 35mm\u003c\/li\u003e\n\u003cli\u003ePower: 20mA @ +12V \/ 10mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39375974727774,"sku":"74727774","price":119.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-151VQuadSequentialSwitch.jpg?v=1623371399"},{"product_id":"doepfer-a-151-quad-sequential-switch","title":"Doepfer A-151 Quad Sequential Switch","description":"\u003cp\u003e Module A-151 (Quad Sequential Switch) is like an electronic four-position rotary switch. It includes trigger and reset inputs, four in \/ outputs, and a common out \/ input. Each time a pulse is received at the trigger input socket, the common out \/ input is connected to the next in \/ output. After the fourth in \/ output, the next trigger makes it step back to the first again, and so on. A positive pulse at the reset input switches the out \/ input immediately back to the first in \/ output.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp class=\"p1\"\u003eVoltages in the range -8V...+8V at the O\/I resp. I\/O sockets can be processed by the module. Four LEDs indicate the active in \/ output (ie. the on that is connected to the out \/ input at any particular time).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 4HP\u003c\/li\u003e\n\u003cli\u003eDepth: 35mm\u003c\/li\u003e\n\u003cli\u003ePower: 20mA @ +12V \/ 10mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39375999402078,"sku":"99402078","price":109.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-151QuadSequentialSwitch.jpg?v=1623372101"},{"product_id":"doepfer-a-145-4-quad-lfo-slim-line","title":"Doepfer A-145-4 Quad LFO - Slim Line","description":"\u003cp class=\"p1\"\u003eModule A-145-4 is a simple quad LFO (\u003cb\u003eL\u003c\/b\u003eow \u003cb\u003eF\u003c\/b\u003erequency \u003cb\u003eO\u003c\/b\u003escillator). Not a very \"exciting\" module, just a bread-and-butter device and a simple demon for work. Virtually in every modular system several LFOs are required for modulation purposes. The module contains four simple LFOs with the waveforms triangle and rectangle. A dual color LED (red = positive \/ yellow = negative output voltage) indicates the triangle output of each LFO. The frequency range can be chosen for each LFO individually by means of a jumper between about 50 Hz ... 0,1 Hz (about 10 seconds, jumper removed) and about 2Hz ... 0,004 Hz (about 3-4 minutes, jumper installed).\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eThe module can be treated as a slimmed version of the quad LFO \u003ca href=\"http:\/\/www.doepfer.de\/a1433.htm\" data-mce-href=\"http:\/\/www.doepfer.de\/a1433.htm\"\u003e\u003cspan class=\"s1\"\u003eA-143-3\u003c\/span\u003e\u003c\/a\u003e as it has similar features available. But the distances between the controls are smaller and rubberized small-sized knobs are used. In return the front panel has 4 HP only which is less than one third of the \u003ca href=\"http:\/\/www.doepfer.de\/a1433.htm\" data-mce-href=\"http:\/\/www.doepfer.de\/a1433.htm\"\u003e\u003cspan class=\"s1\"\u003eA-143-3\u003c\/span\u003e\u003c\/a\u003e. The module is primarily planned for applications where only limited space is available. The functional difference compared to the A-143-3 are the missing sawtooth outputs and frequency range switches.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 4HP\u003c\/li\u003e\n\u003cli\u003eDepth: 30mm\u003c\/li\u003e\n\u003cli\u003ePower: 30mA @ +12V \/ 30mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39376005431390,"sku":"05431390","price":149.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-145-4quadLFOSlim.jpg?v=1623372722"},{"product_id":"doepfer-a-180-2-multiples","title":"Doepfer A-180-2 Multiples","description":"\u003cp class=\"p1\"\u003eModules A-180-1 and A-180-2 are simple multi-connectors. They have eight inter-connected sockets, so that you can \"multiply\" any audio or control signal. From the factory the modules come as two four-fold multiples. But they can be modified as an eight-fold multiple (solder bridge on the pcb). Though these modules are very \"primitive\" they are required very often in patches (e.g. to distribute a clock signal or a control voltage). Within a big A-100 system sufficient multiples should be planned. The function of A-180-1 and A-180-2 is the same. The modules differ only in the front panel width.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 2HP\u003c\/li\u003e\n\u003cli\u003eDepth: 10mm\u003c\/li\u003e\n\u003cli\u003ePower: Passive\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39376007954526,"sku":"07954526","price":64.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-180-2Multiples.jpg?v=1623373147"},{"product_id":"doepfer-a-138s-mini-stereo-mixer","title":"Doepfer A-138S Mini Stereo Mixer","description":"\u003cp align=\"left\"\u003e\u003cspan\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" face=\"Arial\" size=\"2\"\u003eA-138s is a simple but useful 4-in-2 mixing tool. It has four inputs available. Each input is equipped with an attenuator (Level) and a panning control (Pan) which is used to distribute the signal to the left and right output. \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" face=\"Arial\" size=\"2\"\u003eIn the center position of the Pan control the corresponding signal is distributed with equal levels to the left and right output (OUT L and OUT R). In fully CCW position the signal appears only at the left output (OUT L), fully CW only at the right output (OUT R).\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cspan\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" face=\"Arial\" size=\"2\"\u003eBeyond stereo mixing it is equally suited to create variable parallel routings. For example: Any of the four inputs may be routed in variable intensity to feed two filters.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli\u003eDepth: 30mm\u003c\/li\u003e\n\u003cli\u003ePower: 10mA @ +12V \/ 10mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39430326911070,"sku":"26911070","price":145.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-138SMiniStereoMixer.jpg?v=1627603923"},{"product_id":"doepfer-a-140-2-dual-mini-adsr","title":"Doepfer A-140-2 Dual Mini ADSR","description":"\u003cp\u003e\u003cspan\u003eThe module contains two ADSR type voltage controlled envelope generators with exponential curve shapes (charge\/discharge curves of a capacitor).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli\u003eDepth: 40mm\u003c\/li\u003e\n\u003cli\u003ePower: 50mA @ +12V \/ 40mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39430328352862,"sku":"28352862","price":289.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-140-2DualMiniADSR.jpg?v=1627600915"},{"product_id":"doepfer-a-180-9-multicore","title":"Doepfer A-180-9 Multicore","description":"\u003cp align=\"left\"\u003e\u003cspan\u003eA-180-9 is another simple but useful tool. It can be used to connect up to 14 signals between different cases by means of standard network cables (RJ45). These cables are available all over world smoothly in different lenghts and colors. From the factory two black network cables with 0.5 m length are enclosed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cspan\u003eThe upper network connector is wired to the eight sockets 1-8, the lower to the six sockets A-F. \u003c\/span\u003e\u003cspan\u003eThat way it's possible to pre-patch different cases and connect signals, that are required in all cases (e.g. clock, start\/stop, master CV) by means of one or two cables only instead of 14 individual patch cables. When only eight signals are required only the upper network connector is required and the sockets 1-8 are used. When more than eight signals have to be patched both network connectors have to be used. It's also possible to wire the upper and lower network to different cases (i.e. signals 1-8 to external case #1 and signals A-F to external case#2).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cspan\u003eThe module is fully passive (no power supply required) and simply wires the 14 sockets to 14 pins of the network connectors. \u003cstrong\u003eSold as a pair.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 4HP\u003c\/li\u003e\n\u003cli\u003eDepth: 25mm\u003c\/li\u003e\n\u003cli\u003ePower: Passive \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39430350143582,"sku":"50143582","price":199.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-180-9Multicore.jpg?v=1627602941"},{"product_id":"doepfer-a-138n-narrow-mixer-slim-line","title":"Doepfer A-138n Narrow Mixer - Slim Line","description":"\u003cp\u003eThe A-138n mixer is one of the first entries into Doepfer's Slim Line module series: a narrower version of the A-138A linear mixer module.\u003c\/p\u003e\n\u003cp\u003eThe module is a primary audio mixer, featuring four channels of input and two mono outputs. Each channel features an attenuator at the input, allowing for fine adjustments to your overall mix.\u003c\/p\u003e\n\u003cp\u003eIt should be noted, however, that the A-138n's two outputs produce the same mono signal, and not a stereo signal.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 4HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 30mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003ePower: 10mA @\u003cspan\u003e+12V \/ 10\u003c\/span\u003emA @-12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39430359253086,"sku":"59253086","price":117.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-138nNarrowMixer-SlimLine.jpg?v=1627603794"},{"product_id":"doepfer-a-138f-dual-three-way-crossfader","title":"Doepfer A-138f Dual Three-Way Crossfader","description":"\u003cp\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003eModule A-138f contains two identical crossfaders with three inputs and one output each. \u003c\/span\u003e\u003cspan size=\"2\" face=\"Arial\" style=\"font-family: Arial; font-size: small;\"\u003e\u003cspan\u003e \u003c\/span\u003eThree different signals are connected to the inputs A, B and C. In the ccw position of the corresponding control only signal A appears at the output. Between ccw and center position a mix of the signals A and B appears at the output. In the center position only signal B appears at the output.  Between center and cw position a mix of signals B and C appears at the output. In the cw position only signal C appears at the output.\u003cbr\u003e\u003cbr\u003eThe module is DC coupled and can be used for both audio and control voltage processing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 4HP\u003c\/li\u003e\n\u003cli\u003eDepth: 30mm\u003c\/li\u003e\n\u003cli\u003ePower: 10mA @ +12V \/ 10mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cbr\u003e\u003c\/h6\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39555333521502,"sku":"33521502","price":108.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-138fDualThree-WayCrossfader.jpg?v=1636537688"},{"product_id":"doepfer-a-126-2-frequency-shifter","title":"Doepfer A-126-2 Frequency Shifter","description":"\u003cp align=\"left\"\u003eModule A-126-2 is a fully analog frequency shifter for audio signals. A frequency shifter is an audio processing unit that shifts each frequency of the incoming audio signal by the same frequency. If the shifting frequency is e.g. 200Hz an incoming audio frequency of 1000 Hz becomes 1200 Hz, 2000Hz becomes 2200 Hz, 3000 Hz becomes 3200 Hz and so on. Pay attention that this is different from pitch shifting where all frequencies are shifted proportional (e.g. 1000\u0026gt;1200Hz, 2000\u0026gt;2400Hz, 3000\u0026gt;3600Hz) !\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe frequency range of the internal quadrature VCO is about 8 octaves (about 20Hz ... 5kHz). If required an external quadrature VCO can be used.\u003c\/span\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli\u003eDepth: 60mm\u003c\/li\u003e\n\u003cli\u003ePower: 80mA @ +12 \/ 70mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39557149327454,"sku":"49327454","price":555.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-126-2FrequencyShifter.jpg?v=1636677655"},{"product_id":"doepfer-a-126-2v-frequency-shifter","title":"Doepfer A-126-2V Frequency Shifter - Vintage","description":"\u003cp align=\"left\"\u003eModule A-126-2 is a fully analog frequency shifter for audio signals. A frequency shifter is an audio processing unit that shifts each frequency of the incoming audio signal by the same frequency. If the shifting frequency is e.g. 200Hz an incoming audio frequency of 1000 Hz becomes 1200 Hz, 2000Hz becomes 2200 Hz, 3000 Hz becomes 3200 Hz and so on. Pay attention that this is different from pitch shifting where all frequencies are shifted proportional (e.g. 1000\u0026gt;1200Hz, 2000\u0026gt;2400Hz, 3000\u0026gt;3600Hz) !\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe frequency range of the internal quadrature VCO is about 8 octaves (about 20Hz ... 5kHz). If required an external quadrature VCO can be used.\u003c\/span\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli\u003eDepth: 60mm\u003c\/li\u003e\n\u003cli\u003ePower: 80mA @ +12V \/ 70mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39557190287454,"sku":"90287454","price":599.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-126-2VFrequencyShifterVintage.jpg?v=1636677851"},{"product_id":"doepfer-a-149-4-quad-random-voltage-source","title":"Doepfer A-149-4 Quad Random Voltage Source","description":"\u003cp align=\"left\"\u003e\u003cspan style=\"font-family: Arial; font-size: small;\"\u003eModule A-149-4 generates four triggered random voltages which meet the criteria choosen by several controls.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000; font-family: Arial; font-size: small;\" face=\"Arial\" size=\"2\" color=\"#000000\"\u003eManual controls for the criteria selection:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" face=\"Arial\" size=\"2\"\u003e\u003cspan lang=\"EN-GB\"\u003eOctave range (manual control \"Oct.\"): this parameter defines how many octaves are covered by the random voltages (0 ... +5V, with \"Oct.\" control fully CCW only 0V are generated)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-family: Arial; font-size: small;\" face=\"Arial\" size=\"2\"\u003e\u003cspan lang=\"EN-GB\"\u003eGrid (6 illuminated radio buttons): this parameter defines the grid of the random voltages:\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" face=\"Arial\" size=\"2\"\u003e\u003cspan lang=\"EN-GB\"\u003eOctaves (Oct)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" face=\"Arial\" size=\"2\"\u003e\u003cspan lang=\"EN-GB\"\u003eOctaves + Quin (Quint)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" face=\"Arial\" size=\"2\"\u003e\u003cspan lang=\"EN-GB\"\u003eChords\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" face=\"Arial\" size=\"2\"\u003e\u003cspan lang=\"EN-GB\"\u003eScale\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" face=\"Arial\" size=\"2\"\u003e\u003cspan lang=\"EN-GB\"\u003eSemitones \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" face=\"Arial\" size=\"2\"\u003e\u003cspan lang=\"EN-GB\"\u003econtinuous (i.e. stepless)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" face=\"Arial\" size=\"2\"\u003e\u003cspan lang=\"EN-GB\"\u003eMinor \/ Major (2 illuminated radio buttons): this parameter defines in case of chords or scales if they are minor or major. For all other grids this parameter has no meaning\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" face=\"Arial\" size=\"2\"\u003e\u003cspan lang=\"EN-GB\"\u003eSixth \/ Seventh (2 illuminated separate buttons): these parameters defines if the sixth or seventh is added. Valid only if Oct, Quint, Chord or Scale is chosen as grid.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" size=\"2\" face=\"Arial\"\u003eThe output voltages follow the 1V\/octave standard with exception of the Continuous mode. The voltages in this mode are totally random and do not follow the 1V\/oct standard (i.e. not a multiple of 1\/12V). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" size=\"2\" face=\"Arial\"\u003eThe generation of a new random voltage at the output (CV Out 1...4) is triggered by the corresponding trigger input (Trig. In 1...4). The trigger inputs are normalled top down. The minimum trigger level is +2.5V (up to max. +12V). \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 4HP\u003c\/li\u003e\n\u003cli\u003eDepth: 50mm\u003c\/li\u003e\n\u003cli\u003ePower: 50mA @ +12V \/ 10mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39557191630942,"sku":"91630942","price":239.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/DoepferA-149-4QuadRandomVoltageSource.jpg?v=1697061430"},{"product_id":"doepfer-a-126-2exp-expander","title":"Doepfer A-126-2exp Expander","description":"\u003cp align=\"left\"\u003eExpansion module for the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/nightlife-electronics.com\/products\/doepfer-a-126-2-frequency-shifter\"\u003eA-126-2\u003c\/a\u003e Voltage Controlled Frequency Shifter II giving users access to the following outputs (via the seven single pin headers):\u003c\/p\u003e\n\u003col\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003col\u003e\n\u003cli\u003eEnvelope Follower\u003c\/li\u003e\n\u003cli\u003eDome Filter 1\u003c\/li\u003e\n\u003cli\u003eDome Filter 2\u003c\/li\u003e\n\u003cli\u003eRing Modulator 1\u003c\/li\u003e\n\u003cli\u003eRing Modulator 2\u003c\/li\u003e\n\u003cli\u003eUp Shift\u003c\/li\u003e\n\u003cli\u003eDown Shift\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 2HP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39620776362078,"sku":"76362078","price":88.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/A-126-2VoltageControlledFrequencyShifterII.jpg?v=1697062053"},{"product_id":"doepfer-a-126-2expv-expander","title":"Doepfer A-126-2expv Expander - Vintage","description":"\u003cp align=\"left\"\u003eExpansion module for the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/nightlife-electronics.com\/products\/doepfer-a-126-2v-frequency-shifter\"\u003eA-126-2V \u003c\/a\u003eVoltage Controlled Frequency Shifter II giving users access to the following outputs (via the seven single pin headers):\u003c\/p\u003e\n\u003col\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003col\u003e\n\u003cli\u003eEnvelope Follower\u003c\/li\u003e\n\u003cli\u003eDome Filter 1\u003c\/li\u003e\n\u003cli\u003eDome Filter 2\u003c\/li\u003e\n\u003cli\u003eRing Modulator 1\u003c\/li\u003e\n\u003cli\u003eRing Modulator 2\u003c\/li\u003e\n\u003cli\u003eUp Shift\u003c\/li\u003e\n\u003cli\u003eDown Shift\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 2HP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39620782260318,"sku":"82260318","price":96.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-126-2expvExpander.jpg?v=1643943659"},{"product_id":"doepfer-a-121-s","title":"Doepfer A-121s Stereo Multimode Filter","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\" data-mce-style=\"font-family: Arial; font-size: small;\"\u003eModule A-121s is a dual multimode filter which can be used for stereo applications as well as for parallel or serial organized dual mono filters. The core is a 12dB multimode filter identical to the modules \u003cspan\u003e \u003c\/span\u003eA-121-2\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003eA-121-3. The selection of the filter type is continuously from lowpass via notch and highpass to bandpass. We attached great importance to the usability of the manual controls and CV inputs for both stereo and dual mono applications. For the filter parameters frequency (F), resonance (Q) and type (T) common controls and CV inputs as well as single controls and CV inputs are available. For the filter frequency in addition a manual control and CV input for the filter spread (frequency difference or delta F) is available.\u003c\/span\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 12HP\u003c\/li\u003e\n\u003cli\u003eDepth: 45mm\u003c\/li\u003e\n\u003cli\u003ePower: 100mA @ +12V \/ 100mA @ -12V\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39726161100894,"sku":"61100894","price":325.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/DoepferA-121sStereoMultimodeFilter.jpg?v=1697062251"},{"product_id":"doepfer-a-121sv-stereo-multimode-filter","title":"Doepfer A-121SV Stereo Multimode Filter - Vintage","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" size=\"2\" face=\"Arial\" data-mce-style=\"font-family: Arial; font-size: small;\"\u003eModule A-121s is a dual multimode filter which can be used for stereo applications as well as for parallel or serial organized dual mono filters. The core is a 12dB multimode filter identical to the modules \u003cspan\u003e \u003c\/span\u003eA-121-2\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003eA-121-3. The selection of the filter type is continuously from lowpass via notch and highpass to bandpass. We attached great importance to the usability of the manual controls and CV inputs for both stereo and dual mono applications. For the filter parameters frequency (F), resonance (Q) and type (T) common controls and CV inputs as well as single controls and CV inputs are available. For the filter frequency in addition a manual control and CV input for the filter spread (frequency difference or delta F) is available.\u003c\/span\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 12HP\u003c\/li\u003e\n\u003cli\u003eDepth: 45mm\u003c\/li\u003e\n\u003cli\u003ePower: 100mA @ +12V \/ 100mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39726162608222,"sku":"62608222","price":349.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/DoepferA-121svStereoMultimodeFilter.jpg?v=1697062469"},{"product_id":"doepfer-a-111-4-quad-precision-vco-1","title":"Doepfer A-111-4 Quad Precision VCO","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eA-111-4 contains four precision VCOs and has individual controls, inputs and outputs for each VCO available as well as a common control and output unit. After all the A-111-4 is very similar to four \u003c\/span\u003eA-111-3\u003cspan data-mce-fragment=\"1\"\u003e without LFO mode but built in output mixers for the three waveforms, and a master unit for all four VCOs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-single__content-text rte\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 18HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 40mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePower: 120mA @ \u003c\/span\u003e\u003cspan\u003e+12V \/ 100\u003c\/span\u003emA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39736925683806,"sku":"25683806","price":686.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-111-4Quad.jpg?v=1657224176"},{"product_id":"doepfer-a-111-6-mini-synth-voice","title":"Doepfer A-111-6 Mini Synth Voice","description":"\u003cp\u003e\u003cspan\u003eModule A-111-6 is a complete miniature monophonic synthesizer module.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 10HP\u003c\/li\u003e\n\u003cli\u003eDepth: 50mm\u003c\/li\u003e\n\u003cli\u003ePower: 60mA @ +12 \/ 50mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39778153627742,"sku":"53627742","price":365.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-111-6MiniSynthVoice.jpg?v=1661902792"},{"product_id":"doepfer-a-199-spring-reverb","title":"Doepfer A-199 Spring Reverb","description":"\u003cp\u003e\u003cspan\u003eModule A-199 is a spring reverb module. The reverb effect is electronically simulated by means of  3 spiral springs. Spring reverb systems have a very characteristic sound that is based on the (insufficient) mechanical properties of the springs like signal delays, audio resonances, limited frequency range, acoustic feedback behaviour, sensitivity to mechanical shocks and others.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe 3-spring system used in the A-199 ensures a \"dense\" reverb because of the different properties of the three springs.\u003cspan size=\"2\" face=\"Arial\" style=\"font-family: Arial; font-size: small;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli\u003eDepth: 50mm\u003c\/li\u003e\n\u003cli\u003ePower: 80mA @ +12V \/ 10mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39829955674206,"sku":"55674206","price":195.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DopeferA-199Springreverb.jpg?v=1668130681"},{"product_id":"doepfer-a-178v-theremin-control-voltage-source-vintage","title":"Doepfer A-178V Theremin Control Voltage Source Vintage","description":"\u003cp class=\"p1\"\u003eTheremin module for generating a variable control voltage by approaching\/removing hand to\/from an antenna. The distance range is about 30-40 cm. Additionally the module is equipped with a Gate output with adjustable threshold level. Controls\/Inputs\/Outputs: antenna input, offset (knob for zero adjust), 2 x CV out, 2 x LED (for CV control positive\/negative and zero offset adjust).\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eTo simulate the original Theremin two A-178, a VCO (e.g. A-110) and a linear VCA (e.g. A-130 or A-132) are required. But of course the A-178 can be used to control other functions in the A-100 (e.g. filter frequency, modulation depth and\/or speed, tempo, attack\/decay time and so on).\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe CV output voltage of the A-178 can range - according to the setting of the front panel controls - from -10V...+10V. The gate output switches from 0V to about +10V.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli\u003eDepth: 40mm\u003c\/li\u003e\n\u003cli\u003ePower: 60mA @ +12V \/ 20mA @ -12V\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39830065086558,"sku":"65086558","price":190.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-178VThereminControlVoltageSourceVintage.jpg?v=1666303220"},{"product_id":"doepfer-a-138m-4x4-matrix-mixer","title":"Doepfer A-138m 4x4 Matrix Mixer","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eModule A-138m is a 4 x 4 matrix mixer with switches for unipolar\/bipolar mode for each column. Unipolar means that the controls work as attenuators. Bipolar means that the controls work as polarizers. In this mode the amplification is zero in the middle position of the corresponding control. Turning the knob counterclockwise from the center position the signal is subtracted from the output sum with increasing amount (i.e. negative). Turning the knob clockwise from the center position the signal is added to the output sum with increasing amount. The module is DC-coupled and can be used for both audio and control voltage mixing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 20HP\u003c\/li\u003e\n\u003cli\u003eDepth: 20mm\u003c\/li\u003e\n\u003cli\u003ePower: 30mA @+12V \/ 30mA @-12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39891288752222,"sku":"88752222","price":270.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DOEPFERA-138M4X4MATRIXMIXER.jpg?v=1673472653"},{"product_id":"doepfer-a-118-2-noise-random-t-h-s-h","title":"Doepfer A-118-2 Noise \/ Random \/ T\u0026H \/ S\u0026H","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eModule A-118-2 is the slim version of module A-118-1 and offers essentially the same features as the A-118-1. But the distances between the controls are smaller and rubberized small-sized knobs are used. In return the front panel has 4 HP only which is half the width of the A-118-1. The module is primarily planned for applications where only limited space is available. The functional difference between A-118-1 and A-118-2 is the additional T\u0026amp;H\/S\u0026amp;H unit which is not included in the A-118-1.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 4HP\u003c\/li\u003e\n\u003cli\u003eDepth: 20mm\u003c\/li\u003e\n\u003cli\u003ePower: 20mA @ +12V \/ 20mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39919903178846,"sku":"03178846","price":159.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-118-2.jpg?v=1676676837"},{"product_id":"doepfer-a-120-24db-low-pass","title":"Doepfer A-120 24dB Low Pass Filter","description":"\u003cp\u003e\u003cspan size=\"2\" face=\"Arial\"\u003eModule A-120 is a voltage controlled low-pass filter, which filters out the higher parts of the sound spectrum, and lets lower frequencies pass through. The Cut-Off Frequency determines the point at which filtering takes effect. You can control this manually, or by voltage control (filter modulation, for instance by an LFO). Three CV inputs are available, and the sum of the voltages from these affects the filter cut-off.\u003cbr\u003e\u003c\/span\u003e\u003cspan size=\"2\" face=\"Arial\"\u003e\u003cbr\u003eThe module is based on a so-called \"transistor ladder\" design, with a cut-off slope of -24 dB\/octave, as in various Moog synthesizers. That's what gives it its classic, legendary Moog sound.\u003cbr\u003e\u003c\/span\u003e\u003cspan size=\"2\" face=\"Arial\"\u003e\u003cbr\u003eResonance (or Emphasis) is adjustable all the way up to self-oscillation - in which case the filter behaves like a sine wave oscillator.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli\u003eDepth: 40.3mm\u003c\/li\u003e\n\u003cli\u003ePower: 30mA @ +12V \/ 20mA @ -12V\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39936841908318,"sku":"41908318","price":178.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DopeferA-120.jpg?v=1678842126"},{"product_id":"doepfer-a-134-1-voltage-controlled","title":"Doepfer A-134-1 Voltage Controlled Panner\/Crossfader","description":"\u003cp\u003e\u003cspan face=\"Arial\" size=\"2\"\u003eA-134-1 is a voltage controlled universal panning and\/or crossfader module. If the module is used a voltage controlled Panning device one audio signal is panned to two different outputs.  If the module is used a voltage controlled Crossfader two audio signals are mixed to one common output. The module enables even compositions of both functions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\" size=\"2\"\u003eThe module contains two linear high quality VCAs (made with CEM3381\/PA381 until April 2013, SSM2164 from May 2013). VCA2 works in the opposite direction of VCA1 i.e. the more VCA1's loudness increases the more VCA2's loudness decreases. The panning or crossfading is adjusted with a control knob (manual control) and by two external control voltages, one equipped with an attenuator. Suitable control voltage sources are e.g. LFOs (A-145, A-146, A-147), envelope signals (A-140, A-141, A-142, A-119), random (A-118), Theremin (A-178) or a voltage coming from an MIDI-to-CV-Interface (A-190, A-191). The panning\/crossfading is displayed with 2 LEDs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\" size=\"2\"\u003eA-134-1 has an audio input with attenuator for each VCA. If the audio input of VCA2 is not used the audio input of VCA1 is connected with audio in of VCA 2, i.e. the sockets are \"normalled\". The module has three audio outputs:  Left Output (VCA1), Right Output ( VCA2) and Mix. For Panning applications the outputs Left Out and Right Out are used. If the module is used as as Crossfader the Mix Output functions as output.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\" size=\"2\"\u003eModule A-134-1 enables voltage controlled stereophonic panning effects (one audio signal distributed to two outputs), crossfading effects (two audio inputs mixed to one audio output with voltage controlled loudness proportion) and combinations of both effects.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8HP\u003c\/li\u003e\n\u003cli\u003eDepth: 40.3mm\u003c\/li\u003e\n\u003cli\u003ePower: 40mA @ +12V \/ 20mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39936842170462,"sku":"42170462","price":151.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/products\/DoepferA-134.jpg?v=1678842511"},{"product_id":"doepfer-a-160-2v-clock-divider-ii","title":"Doepfer A-160-2V Clock Divider II","description":"\u003cp\u003eModule A-160-2V is an enhanced version of the standard clock divider A-160. The module is a frequency divider for clock\/trigger\/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Clock input will take any digital signal from, eg., an LFO, MIDI sync, or the gate from a MIDI-CV interface. At the outputs, you have access to three sets of seven different sub-divided clock signals, from half the clock frequency down to 1\/128. The low\/high levels of the output signals are 0V and about +10V.\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe A-160-2V also has a reset input. Whenever a reset signal is sensed, all outputs are set to certain levels which depend upon the selected mode. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 4HP\u003c\/li\u003e\n\u003cli\u003eDepth: 35mm\u003c\/li\u003e\n\u003cli\u003ePower: 50mA @ +12V \/ 50mA @ -12V \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39986347868254,"sku":"47868254","price":189.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/Doepfer_A-160_2V.jpg?v=1741809556"},{"product_id":"doepfer-a-101-8-photo-phasing","title":"Doepfer A-101-8 Photo Phasing","description":"\u003cp class=\"p1\"\u003eModule A-101-8 is a 8-stage phase shifter which uses light-sensitive resistors (LDR) and is a replica of the Compact Phasing A manufactured by the company Schulte in the seventies. The actual phasing circuit is identical to the historic model. Only the illumination control of the LDRs is different: the A-101-8 uses LEDs to illuminate the LDRs, the historic model used incandescent miniature lamps. And the A-101-8 has no built-in LFO but can be controlled by any external control voltage source (e.g. LFO, ADSR, random, Theremin, ribbon controller, sequencer, midi). The phasing offset (i.e. the base value for the phase shifting) and the modulation depth of the external control signal can be adjusted separately. The Compact Phasing A had no offset control but only a depth control for the built-in LFO. Feedback and mixing ratio of the output signal are set by two controls. The audio input is equipped with an attenuator. The module has two audio outputs available (same as the historic model) and a visual display of the phase shifting.\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eWidth: 4HP\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eDepth: 45mm\u003c\/li\u003e\n\u003cli class=\"li1\"\u003ePower: 30 mA +12V \/ 30 mA -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39993678561374,"sku":"78561374","price":195.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/DoepferA-101-8PhotoPhasing.jpg?v=1686255903"},{"product_id":"doepfer-a-101-8v-photo-phasing-vintage","title":"Doepfer A-101-8V Photo Phasing - Vintage","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\" face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003eModule A-101-8 is a 8-stage phase shifter which uses light-sensitive resistors (LDR) and is a replica of the Compact Phasing A manufactured by the company Schulte in the seventies. The actual phasing circuit is identical to the historic model. Only the illumination control of the LDRs is different: the A-101-8 uses LEDs to illuminate the LDRs, the historic model used incandescent miniature lamps. And the A-101-8 has no built-in LFO but can be controlled by any external control voltage source (e.g. LFO, ADSR, random, Theremin, ribbon controller, sequencer, midi). The phasing offset (i.e. the base value for the phase shifting) and the modulation depth of the external control signal can be adjusted separately. The Compact Phasing A had no offset control but only a depth control for the built-in LFO. Feedback and mixing ratio of the output signal are set by two controls. The audio input is equipped with an attenuator. The module has two audio outputs available (same as the historic model) and a visual display of the phase shifting.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003eWidth: 4HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003eDepth: 45mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\" face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003ePower: \u003cspan data-mce-fragment=\"1\"\u003e30mA @ +12V \/ 30mA @ -12V\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39993685311582,"sku":"85311582","price":241.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/DoepferA-101-8VPhotoPhasingVintage.jpg?v=1687299483"},{"product_id":"doepfer-a-147-4-dual-vclfo","title":"Doepfer A-147-4 Dual VCLFO","description":"\u003cp\u003e\u003cspan style=\"font-family: Arial; font-size: small;\"\u003eModule A-147-4 is a dual voltage controlled LFO (\u003c\/span\u003e\u003cb style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003eL\u003c\/b\u003e\u003cspan style=\"font-family: Arial; font-size: small;\"\u003eow\u003c\/span\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cb style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003eF\u003c\/b\u003e\u003cspan style=\"font-family: Arial; font-size: small;\"\u003erequency\u003c\/span\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cb style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003eO\u003c\/b\u003e\u003cspan style=\"font-family: Arial; font-size: small;\"\u003escillator). Each LFO has the five waveforms triangle, sine, rising and falling sawtooth, as well as rectangle available. The rectangle output features manually adjustable pulsewidth and pulsewidth modulation by means of an external control voltage. The core waveform is triangle. The other waveforms are derived from triangle by means of waveform converters. The frequency of each LFO can be adjusted manually and modulated by means of an external control voltage with associated attenuator and polarity switch. By means of a jumper the basic frequency range of each LFO can selected: about 0.02 Hz (~ 50 seconds) ... 2.5kHz or about 0.0017 Hz(~ 600 seconds) ... 220Hz. That way each LFO can be used also as a VCO with a max. frequency of about 2.5kHz. Each LFO features a reset input which can be used to reset the triangle signal.\u003c\/span\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan style=\"font-family: Arial; font-size: small;\"\u003eWidth: 4HP\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" size=\"2\" face=\"Arial\" data-mce-fragment=\"1\"\u003eWidth: 8HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" size=\"2\" face=\"Arial\" data-mce-fragment=\"1\"\u003eDepth: 45mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" size=\"2\" face=\"Arial\" data-mce-fragment=\"1\"\u003ePower: 80\u003cspan data-mce-fragment=\"1\"\u003e mA +12V \/ 70 mA -12V\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39993722798174,"sku":"22798174","price":265.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/DoepferA-147-4.jpg?v=1686259409"},{"product_id":"doepfer-a-171-4-quad-voltage-controlled-slew-limiter-polyphonic-portamento","title":"Doepfer A-171-4 Quad Voltage Controlled Slew Limiter","description":"\u003cp\u003e\u003cspan style=\"font-family: Arial; font-size: small;\"\u003eModule A-171-4 is a fourfold voltage controlled slew limiter. It's intended purpose is\u003c\/span\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan style=\"font-family: Arial; font-size: small;\"\u003epolyphonic portamento but can be used also for other applications where several slew limiters are required. The common slew time can be adjusted manually and in addition controlled by an external control voltage. The module\u003c\/span\u003e\u003cspan style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan style=\"font-family: Arial; font-size: small;\"\u003euses light-sensitive resistors (LDR). Therefore the slew times are not exactly the same for all units due to the tolerances of the LDRs and the LEDs, which are used to illuminate the LDRs. Inputs and outputs of the slew limiters are buffered to avoid voltage drops. This is especially important for polyphonic portamento applications. Each output can drive several VCOs without the need of exernal buffers. In addition the slew limiter inputs and outputs are available at internal pin headers for internal pre-wiring of polyphonic patches. As the switching contacts of the sockets are used for the internal pre-patching the internal patch can be overridden by using the sockets at the front panel.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003eWidth: 4HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003eDepth: 45mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\" data-mce-fragment=\"1\"\u003ePower: 40\u003cspan data-mce-fragment=\"1\"\u003e mA +12V \/ 40 mA -12V\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":39993731186782,"sku":"31186782","price":175.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/DoepferA-171-4.jpg?v=1686260013"},{"product_id":"doepfer-a-135-5-polyphonic-mixer","title":"Doepfer A-135-5 Polyphonic Mixer","description":"\u003cp data-mce-fragment=\"1\"\u003eModule\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eA-135-5\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eis a combination of a voltage controlled polyphonic mixer and a polyphonic suboctave generator. It is made of 12 voltage controlled amplifiers (VCAs) which are arranged in form of a 4x3 matrix. Herewith up to three four-voice polyphonic signals (e.g. the outputs of three polyphonic VCOs A-111-4) can be mixed. The level of each of the three polyphonic channels (A, B, C) with four voices each can be controlled manually or by means of an external control voltage with associated attenuators.\u003cbr data-mce-fragment=\"1\"\u003eIn addition the module features four frequency dividers which derive the suboctaves from the four input signals of channel A. The suboctave signals are wired to the switching contacts of the sockets of channel B. As long as the sockets of channel B are not patched the suboctave signals of channel A are used as inputs for channel B. The suboctaves are symmetrical rectangle waves with half the frequency of the corresponding signal A. For example two polyphonic VCOs A-111-4) can be used and patched to the channels A and C. Channel B then provides the suboctaves of channel A.\u003cbr data-mce-fragment=\"1\"\u003eAs the module is fully DC coupled it can be used also for the mixing of control voltages in a polyphonic environment (e.g. for envelopes, LFOs or other control voltages).\u003cbr data-mce-fragment=\"1\"\u003eThe switching contacts of the 12 input sockets and the four outputs are internally connected to pin headers. That way the module can be internally pre-patched to other polyphonic modules (e.g. the four inputs A to an A-111-4, the four inputs C to another A-111-4 and the outputs to the polyphonic filter A-105-4). As the switching contacts of the sockets are used for the internal pre-patching the internal patch can be overridden by using the sockets at the front panel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 10HP\u003c\/li\u003e\n\u003cli\u003eDepth: 55mm\u003c\/li\u003e\n\u003cli\u003ePower: 50mA @ +12V \/ 40mA @ -12V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":40099077685342,"sku":"77685342","price":225.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/DoepferA-135-5PolyphonicMixer.jpg?v=1703642501"},{"product_id":"doepfer-a-105-2-24-db-low-pass-ssi-type-filter","title":"Doepfer A-105-2 24 dB Low Pass (SSI-Type) Filter","description":"\u003cp data-mce-fragment=\"1\"\u003eModule\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA-105-2\u003c\/strong\u003e is a voltage controlled low pass filter with 24dB\/octave slope.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt is the successor of the A-105 which had to be discontinued because the obsolete SSM2044 filter circuit. The A-105-2 is based on the SSI2144 which is in turn the successor circuit of the SSM2044. The features of both modules are nearly the same. The main difference is the clearly reduced front panel width of the A-105-2 (4HP instead of 8HP) and the associated changes of the controls and sockets positions. In addition the A-105-2 is equipped with 2 audio inputs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 4HP\u003c\/li\u003e\n\u003cli\u003eDepth: 45mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":40099084894302,"sku":"84894302","price":190.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0251\/1568\/9012\/files\/A-105-224dBSSILowPassFilter.jpg?v=1703642615"}],"url":"https:\/\/nightlife-electronics.com\/collections\/doepfer.oembed?page=6","provider":"Nightlife Electronics","version":"1.0","type":"link"}